teamstealth

hey everyone,
I removed the airpump, but CANNOT find any sort of belt to fit. I have stock pulleys, so i need either a 29.5K4/5 or a 30K4/5

Where did all of you buy yours? My autozone, oreillys and advance auto parts (albeit being small) did not have it.

Cryptic

iTrader: (1)

I just got a 29 inch belt on yesterday. It took a bit to get on though.

Just get it started on the crank and take a deep well socket and a long ratchet on the crank nut and turn the crank till the belt is all the way on.

a gatorback 29" 4 rib is all I could find too.

littlemilla3

iTrader: (1)

I used a 29.5" 3 rib belt on mine from Autozone. They can order them...

teamstealth

That 29" seems like it will put a lot of unnecessary stress on the alt pulley.

so a bump and hopefully someone knows of some place

KaiFD3S

iTrader: (37)

any autoparts store that sell belts should have a good selection...

fd3s_rx7

iTrader: (13)

buy mine from Napa..

Mahjik

iTrader: (1)

If you just buy a kit, you'll get the belt as well as better contact with the water pump.

teamstealth

lol problem is all of their good selections only go up to 29" and down to 31"

But ill try NAPA and CarQuest 2morrow, and if that fails, a pulley kit it is.

HotWheel

http://www.pettitracing.com/Frameset.html

http://www.srmotorsport.com/sr93plly.html

JONSKI

I bought my 30.0" 4-rib from an truck and industrial machinery parts warehouse.

Wargasm

I got a 29.5 goodyear gatorback SIX rib and cut one rib off carefully with scissors. It's been working fine for 2 years.

Brian