When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Newbie question sorry but better suited to the 3G forums I reckon. I have a bare engine block going in without much reference information, there's a lot of ports etc that I can't immediately determine what function they serve. There's a threaded hole in the rear plate, just below the aftmost mount hole of the LIM and just in front of the side inspection plate. Would someone be kind enough to tell me what mounts here? or is it just supposed to be plugged?
Looks like the rear oil drain for the factory twin turbos.
That is the lower port with the two mounting holes straddling the center hole. He is referring to the hole above, partially covered by the transmission trim plate. I agree with above, I don't think this needs to be plugged.
That is the lower port with the two mounting holes straddling the center hole. He is referring to the hole above, partially covered by the transmission trim plate. I agree with above, I don't think this needs to be plugged.
Yup, no coffee response on my part. Thanks for correcting.
