I've got my linelock halfway hooked up using the existing line but I need to buy a 8 inch peice to finish it off. What size line and fitting is needed? I could unhook it from the linelock and take it up there but it's mounted in a very tight spot so I'd rather not take it off.

Thanks.

FYI, I need the size of the brake lines coming off the distribution block next to the master cylinder.

 

Is the thread size 1/8 in. NPT ?

 

Line size is 3/16 . Can anyone confirm the fitting size?

 

Should be all metric lines and fittings. Might want to see if you can find a writeup on the 929 master cylinder install - the adapter line size and thread to make that work will likely be similar.

Dale