What looks to be needed in order to mount bumper
#1
Full Member
Thread Starter
Join Date: Jul 2004
Location: Fall River, MA
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
What looks to be needed in order to mount bumper
From the looks of this picture what parts would I need to complete the front end.
I'd like to do this part and than have the body shop repaint the whole car.
I'd like to do this part and than have the body shop repaint the whole car.
#2
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
well it is hard to say exactly what you need from a side shot.( can't see the other side.) I will assume that it is in good shape..as in not wrecked. If so then i can see at least the following needed..
1) Front bumper skin
2) Front bumper re-bar(bumper reiforcemnet)Optional 99 re-bar if you go with the 99 front end
3) turn signal/parking lights
4) lower chin spoiler if desired R1/2 or 99 spec and all fastners needed for those parts.
5) New tow hook as it looks like yours has seen better days
6) The black plastic that goes inside the mouth of the front bumper.( not sure if it comes with a new bumper skin or not)
Call Ray Crowe @ Malloy Mazda @ 1-888-533-3400 He will hook you up.
Anyone else chime in if i missed anything
1) Front bumper skin
2) Front bumper re-bar(bumper reiforcemnet)Optional 99 re-bar if you go with the 99 front end
3) turn signal/parking lights
4) lower chin spoiler if desired R1/2 or 99 spec and all fastners needed for those parts.
5) New tow hook as it looks like yours has seen better days
6) The black plastic that goes inside the mouth of the front bumper.( not sure if it comes with a new bumper skin or not)
Call Ray Crowe @ Malloy Mazda @ 1-888-533-3400 He will hook you up.
Anyone else chime in if i missed anything
Last edited by BigIslandSevens; 08-29-04 at 03:14 AM.
#4
Full Member
Just what I am looking for . The previous owner put an aftermarket bumper on my car and I would like a stock one. How much? Happen to have a clean Montego blue by any chance lol.. You can PM me or email me at kwiktsi@nycap.rr.com Thanks!!
Joe
Joe
Originally Posted by FDNewbie
Hey
I have a few front bumpers and a brand new re-bar for sale if you're interested. Oh and I *should* have turn signals as well. Lemme know.
Thanks
~Ramy
I have a few front bumpers and a brand new re-bar for sale if you're interested. Oh and I *should* have turn signals as well. Lemme know.
Thanks
~Ramy
#6
Full Member
Thread Starter
Join Date: Jul 2004
Location: Fall River, MA
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Thanks... I'll be picking it up this week and getting all the parts for the front and any odds and ends needed like plugs to get it started. It'll be a nice project.
yes the other side of car is fine. All other body parts were replaced by a body shop accept front parts due to the company going out of business.
Thanks for the list of parts, Im going to pick up the manual this week but this just gives me an Idea of what would be needed.
Here's another shot!
yes the other side of car is fine. All other body parts were replaced by a body shop accept front parts due to the company going out of business.
Thanks for the list of parts, Im going to pick up the manual this week but this just gives me an Idea of what would be needed.
Here's another shot!
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
KAL797
Test Area 51
0
08-11-15 03:47 PM