3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

What injectors are these? IRP Competition Fuel System

Thread Tools
 
Search this Thread
 
Old Sep 7, 2025 | 05:19 PM
  #1  
RXZGT's Avatar
Thread Starter
Junior Member
Liked
 
Joined: Jun 2023
Posts: 10
Likes: 7
From: NY
What injectors are these? IRP Competition Fuel System

I had my car built by IR Performance back in 2022/2023. For the fuel system, they installed the “IRP Competition Fuel System”. I am trying to get my car tuned and need to find out what injectors are installed; when looking at the part numbers on the primary injectors, they appear to be ground off on both injectors (please see picture). Does anyone with the “IRP Competition Fuel System” know what the primary injectors are? Seeing the numbers sanded/ground off is also a bit puzzling so if anyone has any insight on why they are like that I would appreciate it. Thank you!

Looks like it is 0 280 158 ___.



Reply
Old Sep 7, 2025 | 05:47 PM
  #2  
FDAUTO's Avatar
よ*ろ*し*く*
Liked
Loved
Community Favorite
Top Answer: 1
iTrader: (8)
 
Joined: Sep 2022
Posts: 1,669
Likes: 693
From: Tampa
your answer should be in the tune. what ecu do you have?
Reply
Old Sep 7, 2025 | 07:38 PM
  #3  
RXZGT's Avatar
Thread Starter
Junior Member
Liked
 
Joined: Jun 2023
Posts: 10
Likes: 7
From: NY
@FDAUTO Good idea, I didn’t think of that. Thank you. And Haltech 2500
Reply
Old Sep 8, 2025 | 05:31 AM
  #4  
Molotovman's Avatar
Ban Peak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Jul 2002
Posts: 4,250
Likes: 550
From: Northern Virginia
You don't have any pics attached but as FD Auto stated, install NSP, connect, and look at the configuration. It should show 2 rotor and have the injector sizes there, your invoice would also have them listed.

IRP offered different injector options with their fuel system.
Reply
Old Sep 8, 2025 | 05:43 AM
  #5  
RXZGT's Avatar
Thread Starter
Junior Member
Liked
 
Joined: Jun 2023
Posts: 10
Likes: 7
From: NY
@Molotovman I appreciate the NSP guidance, I will look into that when I get a chance. And unfortunately my invoice only says “IRP Competition Fuel System”; I was hoping for some more detail as well. Thank you!
Reply
Old Sep 8, 2025 | 06:12 AM
  #6  
R-R-Rx7's Avatar
Rotor or no motor
Tenured Member: 15 Years
Liked
Loved
Community Favorite
iTrader: (24)
 
Joined: Oct 2006
Posts: 3,744
Likes: 502
From: Limassol, CYPRUS
IRP was traditionally using FIC injectors . FIC might have some more information
Reply
Old Sep 8, 2025 | 06:13 AM
  #7  
Molotovman's Avatar
Ban Peak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (50)
 
Joined: Jul 2002
Posts: 4,250
Likes: 550
From: Northern Virginia
Originally Posted by RXZGT
@Molotovman I appreciate the NSP guidance, I will look into that when I get a chance. And unfortunately my invoice only says “IRP Competition Fuel System”; I was hoping for some more detail as well. Thank you!
They're probably Bosch and 725/2000cc.
Reply
Old Sep 8, 2025 | 01:41 PM
  #8  
Howard Coleman CPR's Avatar
Sponsor
Liked
Loved
Community Favorite
 
Joined: Jan 2025
Posts: 183
Likes: 106
From: Alabama
FWIW, i always buy fuel injectors by the Bosch part number. someone rubbed off the last 3 digits.

i run the same EV 14 injectors for both primary and secondary. the EV14 pintle weighs much less than the EV6 pintle. this allows them to function/atomize well at very low pulse widths.

i run the 0280158333. i buy then from Ballenger for around $150 each. they flow 1462 at 3 BAR and 1650 at 4 BAR.

i bought a set of ID 1300s for primaries a couple of years ago and they didn't work correctly so they are sitting in a box.

their Bosch pn is 0280158412.

you probably have the 412s... have them flowed for your answer.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hanman
3rd Generation Specific (1993-2002)
7
Aug 3, 2009 06:32 PM




All times are GMT -5. The time now is 03:44 PM.