3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

what is this hose?

Thread Tools
 
Search this Thread
 
Old Jun 22, 2003 | 07:36 PM
  #1  
veilsidefd3's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Dec 2002
Posts: 156
Likes: 0
From: st louis
what is this hose?

on the stock air box there are a few hoses that blow back into the airbox. On the driver side of the air box, the one that is on top blows into a silencer/resonator box inside the lid. What is this it comes out of the motor next to the uim. I guess my real question is is it ok if it blows into the air without a filter on the end of the hose? The intake I bought was used and didnt come with the silencer that goes here, so I made one and it silences it but has no filtration. My intake is a pettit.

thanks in advance

mike
Reply
Old Jun 22, 2003 | 08:47 PM
  #2  
911GT2's Avatar
The Power of 1.3
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 2,835
Likes: 0
From: Shrewsbury, Massachusetts
Well, I'm not sure exactly which hose you're talking about, but in this pic, counting intake hoses from the bottom of the pic up, is it the third one from the bottom?

if not, can you save the pic and put an arrow or something on the hose you're talking about?


I know it isn't the pettit intake, but the hoses are all the same anywho.
Reply
Old Jun 23, 2003 | 10:38 AM
  #3  
maxpesce's Avatar
Ex fd *****
Tenured Member 15 Years
 
Joined: May 2001
Posts: 1,782
Likes: 1
From: Ventura CA USA
Re: what is this hose?

Originally posted by veilsidefd3
on the stock air box there are a few hoses that blow back into the airbox. On the driver side of the air box, the one that is on top blows into a silencer/resonator box inside the lid. What is this it comes out of the motor next to the uim. I guess my real question is is it ok if it blows into the air without a filter on the end of the hose? The intake I bought was used and didnt come with the silencer that goes here, so I made one and it silences it but has no filtration. My intake is a pettit.

thanks in advance

mike
That is the bypass air vent. It vents excess air from the Air Pump via the ACV (Air Control Valve) It only VENTS so needs NO filtration It does however need a muffler/slincer of some sort to prevent the dreaded MOOING Sound.

Last edited by maxpesce; Jun 23, 2003 at 10:46 AM.
Reply
Old Jun 23, 2003 | 07:13 PM
  #4  
veilsidefd3's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Dec 2002
Posts: 156
Likes: 0
From: st louis
MOOING sound, yep thats the one. If it needs no filtration im good, I made a silencer out of a paintball gun hopper and it seems to work well.
Reply




All times are GMT -5. The time now is 03:55 AM.