What Happends When Your Leading Coil Go Bad
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Maryland, GERMANTOWN
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
What Happends When Your Leading Coil Go Bad
hey guys i wanted to know what happends when your leading coil goes bad, im getting no power at top end and the idle is rough, i have just done the hose job, also with the leading coil going bad would it make me run RICH. thanks
#2
rotary sensei
iTrader: (5)
Join Date: Mar 2001
Location: Virginia
Posts: 2,312
Likes: 0
Received 0 Likes
on
0 Posts
Usually the engine will "miss" at high rpms under load. Look at the coil they are usually slightly brown where you plug the wire in...most likely you pulled off a hose or wire doing a hose job. Pull the intake off and look very carefully...
#3
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Maryland, GERMANTOWN
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
well thats what i thought to mrrx7tt i checked it and everything was fine, i get even 11 psi at wot and it stays but my RSM says that im only getting 180 hp when i was getting 286 hp, also would it make a diff if the wastegate solinode and precontrol solinode connectors were on backwards.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
09-04-15 05:19 PM