What exactly is involved when wiring up a Microtech?
Thread Starter
Eats, Sleeps, Dreams Rotary
iTrader: (2)
Joined: Nov 2002
Posts: 3,332
Likes: 0
From: LA, CA
What exactly is involved when wiring up a Microtech?
I want to go with a microtech since the local rotary tuner mostly uses it. I've been reading up on it, and apparently you need to rewire the harness.
Do you take the stock clips and wire them into the Microtech harness? or can you take the stock harness and rewire it at the ECU?
It's either a MT or a PFC, so if its going to be too complicated I might just go with a PFC and wait till Steve Kan is in the area.
Do you take the stock clips and wire them into the Microtech harness? or can you take the stock harness and rewire it at the ECU?
It's either a MT or a PFC, so if its going to be too complicated I might just go with a PFC and wait till Steve Kan is in the area.
Joined: Sep 2003
Posts: 3,067
Likes: 7
From: Home of the Rolex 24
Get an "S" series. LIke an Lt8s or lt10s. You can purchase a wiring harness adapter for a bit extra. It plugs inline w/ECU and allows use of the stock harness. "Plug and play". I have the Lt8s and love it. Traded it in over the PFC. Glad I did.
Thread
Thread Starter
Forum
Replies
Last Post
edmcguirk
NE RX-7 Forum
3
May 30, 2018 06:50 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
