What do you wish you could find?
#26
Senior Member
iTrader: (5)
Join Date: Dec 2005
Location: SF Bay Area, CA
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by moconnor
Can be found under RX-7|Interior on this annoyingly busy Mazdaspeed site:
www.mazda.co.jp/accessories/mazdaspeed/
Not cheap.
www.mazda.co.jp/accessories/mazdaspeed/
Not cheap.
-Andy
#29
Eats, Sleeps, Dreams Rotary
iTrader: (14)
Originally Posted by XxMerlinxX
Aren't they fake carbon fiber though?
#30
You don't stand a chance!
Join Date: Jan 2006
Location: Oklahoma City, OK
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
not sure what it is called but it is a carbon fiber piece that attaches to the rear bumper over the exhaust tip. if anyone knows where to find one, please pm me and let me know.
#31
FEED me
iTrader: (26)
Originally Posted by EatsSRT-4s
not sure what it is called but it is a carbon fiber piece that attaches to the rear bumper over the exhaust tip. if anyone knows where to find one, please pm me and let me know.
#32
RX-7 Bad Ass
iTrader: (55)
- Center caps for my Racing Beat wheels - talk about IMPOSSIBLE to find.
- Can't remember who made it, but someone made CAST aluminum gas and dead pedals that exactly matched the stock clutch/brake pedal. Those suckers looked SO nice.
- NEW STOCK MAZDA FLOOR MATS! I still can't believe they discontinued those so quickly.
- OLD school Apexi gauges. They were SO nice looking and clean, chrome ring, nice lighting, really looked good. Then they started the EL gauges and it was all downhill.
Dale
- Can't remember who made it, but someone made CAST aluminum gas and dead pedals that exactly matched the stock clutch/brake pedal. Those suckers looked SO nice.
- NEW STOCK MAZDA FLOOR MATS! I still can't believe they discontinued those so quickly.
- OLD school Apexi gauges. They were SO nice looking and clean, chrome ring, nice lighting, really looked good. Then they started the EL gauges and it was all downhill.
Dale
#34
Senior Member
iTrader: (5)
Join Date: Dec 2005
Location: SF Bay Area, CA
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=DaleClark- Can't remember who made it, but someone made CAST aluminum gas and dead pedals that exactly matched the stock clutch/brake pedal. Those suckers looked SO nice.[/QUOTE]
I would like some of these, I like the stock look.
I would like some of these, I like the stock look.
#35
~17 MPG
iTrader: (2)
I'd like to know the differences between the Peter Farrell Supercars front bumper,
which was either originally produced or later replicated by Erebuni,
and the Knightsports Type-II front bumper, which I suspect to be the original design that PFS bought the rights to. I think I've read Farrell claiming to have improved the design that he bought, but I don't see any differences from these photos.
-s-
which was either originally produced or later replicated by Erebuni,
and the Knightsports Type-II front bumper, which I suspect to be the original design that PFS bought the rights to. I think I've read Farrell claiming to have improved the design that he bought, but I don't see any differences from these photos.
-s-
#38
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
^ original made by Attain. Replicas which don't have the wing shape of the bottom were from RotaryExtreme and now Evo-R (not shure of name, check GB section) makes them.
Anything rotary specific by a rotary only shop. There's lots of cool JDM rotary tuners.
Anything rotary specific by a rotary only shop. There's lots of cool JDM rotary tuners.
#41
Originally Posted by aoc007
You mean the knee rests? That reminds me I'd like a Spirit-R passenger side foot rest, anybody know if these will fit our LHD FDs?
-Andy
-Andy
And no they wont fit....thats why i posted this.
#42
Hey guys...
Just thought I'd drop in and make a few comments
- RE-Amemiya n1 undersweep: Easy
- Carbon fiber RX-7 Door sills: Readily available
- Genuine old school RE Amemiya diffuser: If you're willing to wait, and to pay for shipping from Japan, it's doable...
- Mazdaspeed R-Spec hood: It's gonna pop up one day, and when it does, I'mma be ALL over it
- Mazdaspeed CF/aluminum shift **** to match the MS e-brake handle that I have. Was discontinued recently so can't be ordered new from Japan: I MAY know someone who has a set still in stock. Drop me an email and I'll see what I can do.
- St. Mays Shotgun exhaust: Believe it or not Mahjik, I've been keeping an eye out for this baby for quite a while. No luck yet.
- Borbet Type TD rims. Discontinued: If they were available in Japan, I may be able to find 'em as well. Drop me an email...
- Spirit R cluster except with the speedo in KPH, retain the max 180mph readings: I have one in stock
- A water temp sensor for my defi D-gauge: Contact Defi or any of their authorized suppliers. I'm sure they can get it (I can too if you have no luck).
- Not sure what it is called but it is a carbon fiber piece that attaches to the rear bumper over the exhaust tip: It's called a CF rear bumper guard. Not sure who makes 'em, but if enough ppl want 'em I can have 'em made.
- Center caps for my Racing Beat wheels - talk about IMPOSSIBLE to find: Dale, your best bet may be to have center caps custom made, just like the old ones. It isn't too expensive to do...
- OLD school Apexi gauges: Shoot me some pics (via email plz) and I'm pretty sure I'll be abl to find 'em. I just found a complete set of old-school black on amber HKS gauges for another customer.
- 4.777 final gears... stuff of legends: Readily available.
- Driver side knee rests and Passenger side footrests: I'm making BOTH to fit LHD FDs...so stay tuned for those
Thanks!
~Ramy
FDNewbie Imports
Just thought I'd drop in and make a few comments
- RE-Amemiya n1 undersweep: Easy
- Carbon fiber RX-7 Door sills: Readily available
- Genuine old school RE Amemiya diffuser: If you're willing to wait, and to pay for shipping from Japan, it's doable...
- Mazdaspeed R-Spec hood: It's gonna pop up one day, and when it does, I'mma be ALL over it
- Mazdaspeed CF/aluminum shift **** to match the MS e-brake handle that I have. Was discontinued recently so can't be ordered new from Japan: I MAY know someone who has a set still in stock. Drop me an email and I'll see what I can do.
- St. Mays Shotgun exhaust: Believe it or not Mahjik, I've been keeping an eye out for this baby for quite a while. No luck yet.
- Borbet Type TD rims. Discontinued: If they were available in Japan, I may be able to find 'em as well. Drop me an email...
- Spirit R cluster except with the speedo in KPH, retain the max 180mph readings: I have one in stock
- A water temp sensor for my defi D-gauge: Contact Defi or any of their authorized suppliers. I'm sure they can get it (I can too if you have no luck).
- Not sure what it is called but it is a carbon fiber piece that attaches to the rear bumper over the exhaust tip: It's called a CF rear bumper guard. Not sure who makes 'em, but if enough ppl want 'em I can have 'em made.
- Center caps for my Racing Beat wheels - talk about IMPOSSIBLE to find: Dale, your best bet may be to have center caps custom made, just like the old ones. It isn't too expensive to do...
- OLD school Apexi gauges: Shoot me some pics (via email plz) and I'm pretty sure I'll be abl to find 'em. I just found a complete set of old-school black on amber HKS gauges for another customer.
- 4.777 final gears... stuff of legends: Readily available.
- Driver side knee rests and Passenger side footrests: I'm making BOTH to fit LHD FDs...so stay tuned for those
Thanks!
~Ramy
FDNewbie Imports
#44
I mean hey, this is how we do. From the first paragraph on our webpage...
"At FDNewbie Imports, LLC, we are hardcore auto enthusiasts first and foremost. That's why if it was made, we'll find it. If it's for sale, we'll get it. If you need it, we'll supply it. OEM parts, aftermarket parts, and even rare hard-to-get JDM parts, we provide it all. If we don't already provide a part you need, we'll expand our services so that we can. That's the dedication you'll find from the diehard gearheads at FDNewbie Imports, LLC."
"At FDNewbie Imports, LLC, we are hardcore auto enthusiasts first and foremost. That's why if it was made, we'll find it. If it's for sale, we'll get it. If you need it, we'll supply it. OEM parts, aftermarket parts, and even rare hard-to-get JDM parts, we provide it all. If we don't already provide a part you need, we'll expand our services so that we can. That's the dedication you'll find from the diehard gearheads at FDNewbie Imports, LLC."
#48
Tha ladies man
Join Date: Oct 2003
Location: Chicago
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
^^ Check tha group buy and fdnewbie's website.
I want the Espirit tail light cover/spoiler.
FDNewbie, I contacted you about this. I dunno if you got it or are really busy but hit me up man. With my recent accident I'll be looking to get this sometime here since I'll be redoing tha whole body.
I want the Espirit tail light cover/spoiler.
FDNewbie, I contacted you about this. I dunno if you got it or are really busy but hit me up man. With my recent accident I'll be looking to get this sometime here since I'll be redoing tha whole body.
#49
koda, I have a set of OEM sideskirts in stock right now...actually already prepped to be painted. I'd get 'em while they're still available!
BuffDaddy915, forgive me, I had a tough past week or two. I'm aiming to get through ALL the emails I have in the next 2 - 3 days, so if I haven't responded to your email yet, I will be doing so shortly.
Thanks,
~Ramy
BuffDaddy915, forgive me, I had a tough past week or two. I'm aiming to get through ALL the emails I have in the next 2 - 3 days, so if I haven't responded to your email yet, I will be doing so shortly.
Thanks,
~Ramy
#50
Rotary Enthusiast
iTrader: (2)
i wish
Originally Posted by darkside7
old JL stealth box...............
For those that don't know JL Audio made a fiberglass enclosure for the FD that blended into the back of the car (stealth like) and held an 8 inch JL Audio sub. You couldn't find it unless you knew what you were looking for. Chuck at Rotary Extreme tried to get one to mass produce but no one responded.
Last edited by phinsn98; 01-20-07 at 11:25 AM.