I am replacing all the hose with silicone one and I am going to clean out the engine bay. I am also going to polish my intake manifold. Any thing else I should do while the engine it out?

 

clutch/flywheel, radiator, aluminum ast, and anything else you can afford

 

done.. with the koyo rad and pettit ast

 

ok, what do you have now and we can then suggest what else you should get

*edit Also, what price are you looking to spend

 

Everything you can afford.... Be a good time to paint if your thinking about it..

 

replace teh oil pan gasket

 

haha.. big budget.. what else? give it all to me at once in a list..

 

Polish as much as you can. Go non sequential. Remove the double throttle.

 

replace engine mounts.

Clean bay and use one of those polish/wax's that is supposed to last a year.

 

like what? give me the names of the products

 

Replace the clutch along with everything else that was mentioned......well I guess the clutch was mentioned also. In stead of replacing the vac lines, you could just go non seq, it will make the reinstall MUCH MUCH MUCH easier!!!!!

STEPHEN

 

Go single turbo.. lol...

 

remove air pump, greddy pulleys, intercooler, radiator, ast, injectors, fuel pulsation dampner, port, single turbo, dp, mp, cb, intake, silicon hoses, remove ac and ps if you want, ic fan, oil coolers, oil cooler fans, polish, hks twin power, plugs, plug wires, etc. etc

 

Dang! you beat me to it.

While you are spending money: tein ha coilovers, hks swaybars, trailing arms, toe links, bushing upgrade, RE hood, feed bumper, cwest sides, knightsport rear bumper, and feed wing. Kinesis K5's all around with S03's wrapping

 

i can just take off the air pump if i have the pulleys and cold air? anything else i would need to do this.. or any advice?