What BHP @the flywheel if poss!

Reply Subscribe

Thread Tools

Search this Thread

02-23-02, 02:02 PM

mr rx

Full Member

Thread Starter

Join Date: Dec 2001

Location: uk

Posts: 103

Likes: 0

Received 0 Likes on 0 Posts

What BHP @the flywheel if poss!

Please look @ the Sig and let me know what Hp I should be getting! The car Goes Very well with only 5k engine!

Im still running 12psi!

I'll be going to the roller soon!

Regards...

PFC
PFS IC
3MM HURLEY RACE SEALS
STREET PORT
STOCK TWINS
G-REDDY DP 3"
MP 3"
RACE BEAT CAT BACK 3"
PETTIT RACE INTAKE
TOCKIO SUSPENSION
UPRATED FT DISCS
@ 12 PSI

Last edited by mr rx; 02-23-02 at 02:05 PM.

Reply Like

02-23-02, 04:41 PM

maxcooper

WWFSMD

Join Date: Jun 2001

Location: SoCal

Posts: 5,035

Likes: 0

Received 4 Likes on 4 Posts

My guess is 320 RWHP, or roughly 375 BHP at the flywheel.

-Max

Reply Like

02-24-02, 01:37 AM

RXTRA7

Full Member

Join Date: Jul 2001

Location: Tennessee

Posts: 145

Likes: 0

Received 0 Likes on 0 Posts

If PFC is a Peter Ferrell computer, then I have no idea. If you are using the Apexi Power FC with settings from the company you purchased it from, that the Horse Power can vary greatly.
A friend of mine purchase his POWER FC with setting for Down-Pipe, Catback and Mid-Size intercooler and it only DYNO-TESTED at 225 RWHP which is approx. 265HP at the flywheel.
Another friend with the EXACT same mods, purchased his from the same company with the EXACT same settings and his car DYNO-TESTED at 310RWHP.

I suggest you purchase a Hand-Held controller and learn how to tune it yourself based on DYNO tests.

Good Luck..

Last edited by RXTRA7; 02-24-02 at 01:39 AM.

Reply Like

02-24-02, 02:51 PM

Grizzly

Rotary Enthusiast

Join Date: Dec 2001

Location: UK

Posts: 1,271

Likes: 0

Received 0 Likes on 0 Posts

The car has been set up on a Dyno and the guy has told Mr Rx that its 320 -330 at the flywheel at 12psi does this sound a little low? I have been in the car and it feels very quick but then i'm a FC man.