3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Weird studering issue

Thread Tools
 
Search this Thread
 
Old 06-03-06, 07:46 PM
  #1  
Broken FD

Thread Starter
 
TurboTagTeam's Avatar
 
Join Date: Sep 2005
Location: Philadelphia
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
Weird studering issue

Al of a suden my car started to act up yesterday. It is studering when I take off in 1st gear. It starts to buck and allmost stalls,then it will then be fine all the way through the rest of the gear. But when stop at a light, when i push in the clutch, the revs drop. The car allmost stalls then returns to a 1000rpm idle. WTF????

Clifnotes-

1000rpm idle
bucking when aclerating out of 1st gear
Allmost stalls when stopping at light

BTW- my vacum is holding at 16psi so I know it can't be a vacum leak. And my map sensor is plugged in.
Old 06-03-06, 08:45 PM
  #2  
Senior Member

 
Mazda99Nikon's Avatar
 
Join Date: Dec 2003
Location: Lexington, IL
Posts: 292
Likes: 0
Received 0 Likes on 0 Posts
Gosh, I'm still a newb, so I won't claim to be the ultimate diagnostician, but a lot of fellows here would bet it's the small switch located just above your clutch pedal. There's a spring in there that gets stuck. You'll notice that's another switch above that. It's the lower of the two. Simple to replace, I'm told. And cheap too.

Do a search for idle and clutch. Should bring up lots of posts.
Old 06-03-06, 08:48 PM
  #3  
RX7 lover

 
BobfisH's Avatar
 
Join Date: Jun 2005
Location: UK
Posts: 1,160
Likes: 0
Received 2 Likes on 1 Post
the guy is right. get your head in the footwell, and follow the clutch pedal up till you see the little white button. Make sure it works ok.

and even if it looks like it works ok, that still doesnt mean it does. do the spring fix on it!
Old 06-03-06, 08:48 PM
  #4  
Rx7 Wagon

iTrader: (16)
 
Narfle's Avatar
 
Join Date: Nov 2002
Location: California
Posts: 6,988
Received 875 Likes on 548 Posts
Any recent modifications?
Old 06-03-06, 11:10 PM
  #5  
Broken FD

Thread Starter
 
TurboTagTeam's Avatar
 
Join Date: Sep 2005
Location: Philadelphia
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Barban
Any recent modifications?
Actually the shortblock was replaced last week. But everything was running perfect untill yesterday.

I did drive the car about 40miles tonight. I have discovered that the studdering will go away once the car is fully warmed up. But the 1000rpm idle is there.

Also when I start the car cold, It idles at around 500-600rpm's.

I will check the clutch switch tommorow.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM



Quick Reply: Weird studering issue



All times are GMT -5. The time now is 10:14 AM.