3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

weird noise and boost problems

Thread Tools
 
Search this Thread
 
Old Jun 23, 2004 | 09:37 PM
  #1  
DOORMAN907's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 16
Likes: 0
From: Ann Arbor
weird noise and boost problems

I just finished replacing my LIM gasket and all of the vacuum hoses. Before I did all of this work I had a bad leak on the LIM but no boost problems at all. Now my LIM leak is fixed but I am getting very little boost. In addition when I accelerate hard a loud sound comes from the turbo area that sounds like a screeching. I do not smell any exhaust around the turbo.

Anyone have any suggestions on how to figure out where a leak might be? Does any know what the screeching noise might be?

Thanks for your help.
Reply
Old Jun 23, 2004 | 10:45 PM
  #2  
Rotarded's Avatar
"Challenged" since 1993
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 540
Likes: 0
From: Columbus, Oh
Check to see that all 5 of the UIM nuts/bolt are tightened down. If it is loose the gasket can act as a "reed" when air is blown by it, hench the screetching.

If that fails, you will probably have have a vacuum leak in a hose or coupler track down.

Last edited by Rotarded; Jun 23, 2004 at 10:48 PM.
Reply
Old Jun 23, 2004 | 11:08 PM
  #3  
mgoddard1's Avatar
I luv my carbon footprint
Tenured Member 15 Years
 
Joined: Mar 2002
Posts: 452
Likes: 0
From: Indianapolis
If the metal gasket behind the air control valve slipped while you put it back on it can cause a loud screeching/siren noise.
Reply
Old Jul 8, 2004 | 04:37 PM
  #4  
BB69's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 22
Likes: 0
From: Midwest
I'm glad to see I'm not the only one with this problem. I bought my FD about three weeks ago. I have been chasing many small issues since then. The best thing I have done is install an Autometer Procomp boost gage. I'm not where I want to put it permanently, so I just had my girlfriend hold it for me when we went for a drive. I was getting some boost at full throttle, but not 10 PSI. Anyway, I went through all my vacuum lines and intake connections. I found a small leak at the throttle body. Once I tightened that up, the car boosted to 10 PSI. I haven't had any problems since.

Good luck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
msilvia
3rd Generation Specific (1993-2002)
28
Apr 14, 2016 12:58 PM
TerryD
2nd Generation Specific (1986-1992)
1
Aug 23, 2015 07:40 AM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM




All times are GMT -5. The time now is 06:13 AM.