OK I finished doing the full non-seq a coulpe weeks ago and befor I had an electrical problem my rx-7 was running like a bat out of hell with only 7psi break-in boost. I'm curently a student at Vatterott College mayjoring in Combination Welding. I cut out my my main flapper and welded my pre-control open and It looks good (didnt have a camera at time) The flappers are made on Inconel a high temp metal that does no like to be welded on.You have to preheat and post heat after the weld and I use a "supper 600" electrode for the welding.

Here's my offer to anyone wanting there flappers welded. Send them to me, you pay the shipping and handleing both ways and put a $10 bill in the box and I'll do it.

PM me if your interested, I'm not new here so ask anyone of the St.Louis guys and they'll vouch for me. **** sound like a deal to me.

P.S. I dont feel like porting anymore waste gates so please dont ask

 

sounds like a great deal man, Im goin single or else i would drive down and hand you 10 bucks lol!

 

sound good Eric let me know

 

St.Louis or anyone close I'll do for free