Vaccum line question
#1
Rotary Enthusiast
Thread Starter
Vaccum line question
is a normal vacum line the same size as a -4an hose?
just wondering, as i need a 1/8npt fitting with a hose end for a vacuum line. just wondering if a 1/8npt to 4an hose end fitting from earls will work for me. its just a normal vacuum line, coming from the wastegate up to the uim.
thanks a bunch.
harrison
just wondering, as i need a 1/8npt fitting with a hose end for a vacuum line. just wondering if a 1/8npt to 4an hose end fitting from earls will work for me. its just a normal vacuum line, coming from the wastegate up to the uim.
thanks a bunch.
harrison
#2
RX-7 Bad Ass
iTrader: (55)
According to this -
http://www.bakerprecision.com/aqp2.htm
-4 AN hose is .22" ID. You can figure out the fraction .
Baker Precision has tons of good info on AN fittings and hose on their site, BTW.
Dale
http://www.bakerprecision.com/aqp2.htm
-4 AN hose is .22" ID. You can figure out the fraction .
Baker Precision has tons of good info on AN fittings and hose on their site, BTW.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM