V-Mount Question
#2
Senior Member
iTrader: (1)
Join Date: Oct 2003
Location: Atlanta, GA
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
New radiator, new intercooler core, piping, modify radiator hose, relocate battery, modify/remove AC I would imagine, and a working knowlege of welding/fabrication. Search for threads by KinetikFD or similar. He had a great thread on the one he made.
#6
Senior Member
iTrader: (1)
Join Date: Feb 2004
Location: ohio
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
rad. is the same size you would buy aftermarket....mine was koyo...not sure if there all the same size or not....
its also gets tilted down...if your making your own ..need welder, alum. piping, some alum. stock, rad., ic, aftermarket intake, small battery or relocate it, ac lines need modified, ac condensor needs remounted....
i did alot of research before buying mine...look up v-mount ic, vmount ic , vmount...
different results came back...its all in how you word it...i took pics when i installed my vmount, if you want any....
goodluck
brad
its also gets tilted down...if your making your own ..need welder, alum. piping, some alum. stock, rad., ic, aftermarket intake, small battery or relocate it, ac lines need modified, ac condensor needs remounted....
i did alot of research before buying mine...look up v-mount ic, vmount ic , vmount...
different results came back...its all in how you word it...i took pics when i installed my vmount, if you want any....
goodluck
brad
#7
you can use your fluidyne but will have to block off the bottom hose outlet and divide the top end tank at the middle so you can build a taller tank to place the new hose outlet.
check my thread https://www.rx7club.com/showthread.p...hlight=v-mount i should have a few pics of my radiator.
check my thread https://www.rx7club.com/showthread.p...hlight=v-mount i should have a few pics of my radiator.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM