used or reman. engine?
used or reman. engine?
Senior Member
Joined: Mar 2001
Posts: 724
Likes: 0
From: Massachusetts
Get a reman, it comes with a warranty. Contact Ray at Malloy mazda (703) 490-8170, tell him you're from the rx7 club and you'll get the reman for $1950 + shipping. Ray is the MAN I can't praise enough about him.
Originally posted by Dont_Be_A_Rikki
Well it is a damn good port dude. Sorry I love it
-Rikki
Well it is a damn good port dude. Sorry I love it
-Rikki
) i don't tell everyone to get the exact same one as me though. i'm not a living advertisement 
Trending Topics
Passenger
Posts: n/a
Originally posted by vosko
i love my port too. so does pepe loco (8 second drag race car) i don't tell everyone to get the exact same one as me though. i'm not a living advertisement
i love my port too. so does pepe loco (8 second drag race car
) i don't tell everyone to get the exact same one as me though. i'm not a living advertisement
-Rikki
you should only have JR's Rotary Performance rebuild and port your engine.
how can you compare were your other engines ported ? the only way to tell would be to compare to other ported engines...
how can you compare were your other engines ported ? the only way to tell would be to compare to other ported engines...
Passenger
Posts: n/a
Originally posted by gmonsen
your best bet is either rebuilding your engine or getting a reman from malloy mazda. the only thing is that, if you syart a rebuild and the housings are shot or the rotor are shot, you end up with a costly or impossible task. the reman is the most sure way to go about it, imho. i am sure the ray crowe at malloy is your best bet there.
if you want to get it ported, there are several good firms around the country where you could get it done, including pinneapple and sr morotrsport out west, rotary performance in texas, pettit in florida, and kd rotary in pennsylvania. you could even get it ported by rikki's buddy, peter farrell, in virginia (unfortunately, peter would have to charge YOU, since he can only afford ONE sycophant this year. ) -gordon
your best bet is either rebuilding your engine or getting a reman from malloy mazda. the only thing is that, if you syart a rebuild and the housings are shot or the rotor are shot, you end up with a costly or impossible task. the reman is the most sure way to go about it, imho. i am sure the ray crowe at malloy is your best bet there.
if you want to get it ported, there are several good firms around the country where you could get it done, including pinneapple and sr morotrsport out west, rotary performance in texas, pettit in florida, and kd rotary in pennsylvania. you could even get it ported by rikki's buddy, peter farrell, in virginia (unfortunately, peter would have to charge YOU, since he can only afford ONE sycophant this year.
) -gordon
. As Gordo noted above those are good shops but I speak from my personal Expeirence. As you to Gordon can say Dave has built you a FEW GOOD MOTORS.Gordon thanx for the support of PFS it is kind of you.-Rikki
Originally posted by gmonsen
(unfortunately, peter would have to charge YOU, since he can only afford ONE sycophant this year. ) -gordon
(unfortunately, peter would have to charge YOU, since he can only afford ONE sycophant this year.
) -gordon
Well A reman by Ray Crowe will get you hasseld with phone calls about your service you got( Man I never took my car there hmmm.)
Just my $.02
Hey, where did my $$$ go?
Joined: Feb 2001
Posts: 4,413
Likes: 0
From: Bimingham, AL
Originally posted by Dont_Be_A_Rikki
Well A reman by Ray Crowe will get you hasseld with phone calls about your service you got( Man I never took my car there hmmm.) but it is a damn good motor when PORTED and gone thru by the a top RX-7 shop. As Gordo noted above those are good shops but I speak from my personal Expeirence. As you to Gordon can say Dave has built you a FEW GOOD MOTORS.Gordon thanx for the support of PFS it is kind of you.
-Rikki
Well A reman by Ray Crowe will get you hasseld with phone calls about your service you got( Man I never took my car there hmmm.) but it is a damn good motor when PORTED and gone thru by the a top RX-7 shop
. As Gordo noted above those are good shops but I speak from my personal Expeirence. As you to Gordon can say Dave has built you a FEW GOOD MOTORS.Gordon thanx for the support of PFS it is kind of you.-Rikki
Dude you got a Mazda reman and had Peter streetport it (or so you said but maybe we are finding out thats not the case), whats the big deal. Any shop can do a various port jobs, its not magic or anything. You said you've had 3 before, where they ported, if not I can understand why this one feels stronger. When you put in the other 3 did you have as many mods as now? Were you running the same boost as now? What about turbos? Do you have different turbos now versus then?
I'm just trying to figure out what Peter did to your streetported reman to make you think its something special? I'm sure its a good motor but its just like every other good compression 13B with a street port.
Maybe you should make sure that dyno (by the way what kind of dyno is it) is using corrected numbers, it can make a big defference.
STEPHEN
Last edited by SPOautos; Aug 15, 2002 at 12:57 AM.
Senior Member
Joined: Feb 2001
Posts: 310
Likes: 0
From: Carl Junction, MO
Originally posted by Bucrx7
Get a reman, it comes with a warranty. Contact Ray at Malloy mazda (703) 490-8170, tell him you're from the rx7 club and you'll get the reman for $1950 + shipping. Ray is the MAN I can't praise enough about him.
Get a reman, it comes with a warranty. Contact Ray at Malloy mazda (703) 490-8170, tell him you're from the rx7 club and you'll get the reman for $1950 + shipping. Ray is the MAN I can't praise enough about him.
edit:
oops...nevermind. i just saw that i have to send the core back
that blows!!!! what should i do?...i'm in need of an engine too here in a little bit.
Last edited by Mikey; Aug 15, 2002 at 02:56 PM.
What Subscription?
Joined: Apr 2001
Posts: 5,926
Likes: 2
From: Aiken SC USA
Gordon, I think Rikki needs some of his PFS brand Moist towellettes to wipe the "special sauce" off his face. Judging from the quality of work ROB @ Pineapple did on my : egads second gen, I would recommend him.
Hey, where did my $$$ go?
Joined: Feb 2001
Posts: 4,413
Likes: 0
From: Bimingham, AL
Originally posted by Mikey
so do you get to keep your original engine too?...or do i have to send mine in to him after i buy one from him?
edit:
oops...nevermind. i just saw that i have to send the core back that blows!!!! what should i do?...i'm in need of an engine too here in a little bit.
so do you get to keep your original engine too?...or do i have to send mine in to him after i buy one from him?
edit:
oops...nevermind. i just saw that i have to send the core back
that blows!!!! what should i do?...i'm in need of an engine too here in a little bit.
Everyone is going to require a core. If you dont send a core your going to spend prob $5000 because they will have to buy all new housings, rotors, eshaft, ect ect ect.
STEPHEN
03 Cobra Killer
Joined: Jan 2002
Posts: 1,423
Likes: 0
From: All Over
Pineapple is building me an engine now, they sourced the reman for me without core exchange for $3195.
The rebuild is another $1900 - $2400 depending on 2Y/24k or 5Y/60K. If that was what you were thinking, $5000 is about right.
K
The rebuild is another $1900 - $2400 depending on 2Y/24k or 5Y/60K. If that was what you were thinking, $5000 is about right.
K
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Kyle,
Just curious, but why didn't you go with Dave and Kim at KD Rotary from PA? They can get a Malloy Mazda reman, and build up the motor from that reman. You could then have Dave ship you the "KD-rotary built" reman from KD to Columbus OH...
The freight would have been cheaper probably.
Or you could have removed your motor and shipped to KD and have Dave rebuild your core?
Although I read from everyone that this is a waste of money. It's seems the consensus from the FD Forum is that it's better to start with a good reman from Malloy (Ray Crowe I guess is the fellow at Malloy Mazda Parts Dept), and have Dave (KD Rotary) or Rob (Pineapple guy) rebuild the reman??
I dunno, I've been re-searching the subject, as I'll be in need of a new motor probably in the spring of 2003.
Just curious, but why didn't you go with Dave and Kim at KD Rotary from PA? They can get a Malloy Mazda reman, and build up the motor from that reman. You could then have Dave ship you the "KD-rotary built" reman from KD to Columbus OH...
The freight would have been cheaper probably.
Or you could have removed your motor and shipped to KD and have Dave rebuild your core?
Although I read from everyone that this is a waste of money. It's seems the consensus from the FD Forum is that it's better to start with a good reman from Malloy (Ray Crowe I guess is the fellow at Malloy Mazda Parts Dept), and have Dave (KD Rotary) or Rob (Pineapple guy) rebuild the reman??
I dunno, I've been re-searching the subject, as I'll be in need of a new motor probably in the spring of 2003.
