revvvin7

OK well I have made some changes recently and need a little help. Over the last month I have replaced my Radiator, AST, and Fans. I stood my Radiator straight up and added the Pettit Racing AST. I have filled up my overflow tank, AST and water filler neck. When I turn the key on my car the "add coolant light" come on and starts ringing. I have done numerous things this site suggested but it doesn't seem to help. Below is a list of what I have tried.

1. Filled water filler neck and pinched hoses to release air
2. Removed the coolant line from the TB and filled the filler neck
3. Setup a funnel system and filled it with water and walked away for a few horus while the water went in and the air came out.
4. Filled AST to the top

Now I have the funnel system setup right now with tons of water in it waiting for it to replace the air with water. I went through two 1-liter bottles of water and currently have a bottle of water in it now but it is no longer going into the system. The water level hasn't moved in a day so I am pretty sure it's full. I am fairly sure it's full but the red light is still coming on.

What can I do to get this red light off and stop it from ringing?

Is their wiring that might have gone bad? if so where is that located?

Mahjik

iTrader: (1)

The low coolant sensor is in the front of the t-stat housing. There is also a second part of that wiring which connects behind the power steering pump. Do you have any empty connectors hanging around?

revvvin7

Yea I do. What is the one behind the power steering? Where does it go? What does the connector and line look like?

Mahjik

iTrader: (1)

Check this post:
https://www.rx7club.com/showpost.php...11&postcount=2