When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Updated the list of Gates PowerGrip hose clamps for the FD now including the power steering hoses. These are my go-to clamps of choice now as I was tired of weeping hoses and clamps that dig into the rubber. These are great clamps and clean up the engine bay. Just use a heat gun to shrink them down and they have full 360 degree seal without digging into the hose and have a larger surface area of grip. Easy to snip off with a pair of flush cut wire cutters, just nip thru the clamp and can reuse the hose. Yes they are a one time use clamp.
For the Upper and Lower radiator hoses P/N 32948, 4qty
Heater hoses, heater core inlet and outlet, Left engine block rear and front lower off the water pump housing. P/N 32925, 8qty
Throttle body inlet and outlet hoses, Turbo inlet and outlet hoses, AST inlet and outlet hoses, and water pump housing to pipe hose P/N 32915, 14qty
Power Steering Hoses on pump to reservoir and reservoir to rack P/N 32922, 4qty
