3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Unable to rev to red line...?

Thread Tools
 
Search this Thread
 
Old Aug 6, 2008 | 07:27 PM
  #1  
c00lduke's Avatar
Thread Starter
Rotary Freak
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 2,360
Likes: 0
From: Overland Park, KS
Unable to rev to red line...?

I couldn't remember the last time I took my motor to red line so I thought I'd give it a go. I tried and had zero success. The revs were climbing as normal but right around 6500rpm, still at WOT, the revs dropped to 4500 and began to bounce back up to 6500. As it climbs and reaches the peak, it feels as if no more combustion is occurring.

Fully modded, PFC, rev limit set at ~8k, tuned, 5k in rebuild.

Any ideas?
Reply
Old Aug 6, 2008 | 10:00 PM
  #2  
Dudemaaanownsanrx7's Avatar
wannaspeed.com
Tenured Member 20 Years
iTrader: (23)
 
Joined: Feb 2003
Posts: 2,802
Likes: 5
From: Texas
maybe ignition break up, or fuel cut.
undersized fuel system for your mods?, clogged filter, old plugs/wires, dirty injectors. coils out of spec
Reply




All times are GMT -5. The time now is 10:20 AM.