3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

TwinPower and Poly Motor Mount Questions

Thread Tools
 
Search this Thread
 
Old Nov 10, 2006 | 09:16 PM
  #1  
Buzzardsluck's Avatar
Thread Starter
No Paypal Accepted!
Tenured Member 10 Years
 
Joined: Sep 2005
Posts: 849
Likes: 1
From: san antonio, Texas
TwinPower and Poly Motor Mount Questions

Since my other thread got put in the unread section, Ill try asking these two questions here (thats what I get for making one thread instead of 2 to start with).


The red light on my HKS twinpower is faint. Should the light be a strong bright light or just barely lit? The manual just says lit but doesnt mention if the indicates units power.

I recently installed a new motor along with a light flywheel and 6 puck clutch along with poly motor mounts. I noticied that I now feel a "heavy" vibration feeling that feels like its coming from where the tranny meets the engine. I only notice it when in neutral (rolling included) and slightly rev the engine. Driving 55 I didn't notice any vibration. Is this the solid mounts causing this vibration? I have no previous knowledge of how it should feel.

Thanks
Reply
Old Nov 10, 2006 | 09:21 PM
  #2  
kuroi FD's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Jan 2005
Posts: 769
Likes: 0
From: orlando/st. petersburg
If the poly mount is a bolt through the poly then yeah its from that.
Reply
Old Nov 11, 2006 | 09:11 AM
  #3  
books's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Mar 2002
Posts: 1,751
Likes: 46
From: St. Louis
My TwinPower is dimly lit.

Previously when I installed the solid mounts, I had some vibes at low rpms. They are gone now, try tightening the ppf nuts to the tranny.
Reply




All times are GMT -5. The time now is 05:11 AM.