last night my turn signal lights stopped working. The interior turn signal arrows are not going as well as the indicaters on the front and rear of the car, but the "clicking" noise is still there when I turn them on, I've done a search but to no avail, any help here would be great.

 

could be something as simple as a loose wire. Check all wires to bulbs...

 

so if one wire goes out does that break the circuit for the rest ??

 

i had one wire go out....it frayed....
I got no turn signals, no clicking, and no indicators on the dash

 

Did you check the hazard fuse?

I know it makes sense that the thing wouldn't click if that were the case. But, from the diagrams, the flasher unit gets power from the hazard fuse AND through the blinker switch on a separate circuit. It's possible only the hot-side of the relay uses the hazard fuse.

I'd check that or the flasher unit itself first, unless someone's been poking around with the wiring lately.