Transmission Wiring harness question
Does the Transmission Wiring harness have a output that tells what gear its in?
|
I believe there is only a neutral switch and reverse switch, not individual gear sensors.
|
^ incorrect, the transmission has switches for 1st and 2nd gear. The boost control has a slightly different logic for those gears on a stock ecu. Check the wiring diagram and the service highlights manual for more details.
Edit: Shawn why do you want to know this? You have a Haltech. Double edit, I figured out why....https://www.rx7club.com/haltech-foru.../#post11259362 |
what is the purpose of all 4 of those plugs?
the reason i ask, someone gave me a single turbo harness and it has everything except plugs for the transmission. it makes me think they are un-needed but in the single turbo harness write up, it tells you to keep them. i'll be using a pfc so i dont really know if they can be deleted without some kind of error. the wiring diagram doesnt mention them at all and the only other thread i found with someone asking about them never got an answer. since this is a pretty relevant thread, to keep from making another one, i'll ask here: what are the 4 connectors for on the manual transmission and which is which? 1.starter inhibitor 2.reverse switch 3.neutral switch? 4. |
VSS sensor is one of them. i know because my speedo didn't work because i forgot to plug it in. =)
|
So would vss fill the 4th spot?
|
From rywire
Reverse lights, speed, neutral, and 5th gear. |
All times are GMT -5. The time now is 11:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands