3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Tools for Rebuild

Thread Tools
 
Search this Thread
 
Old Oct 7, 2003 | 04:20 PM
  #1  
Louis M's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: RX7 Heaven
Tools for Rebuild

Alright, I want to embark on a rebuild, but I want to get the prices together before I get started b/c i'm thinking maybe having someone do the work for me might actually be cheaper... anyway:

-jack: $20
-four engine stands: $30
-engine hoist: $40 (rent)
-one of those 100 piece sets: $60
-air gun: $50
-air tank: $50
-hoses: $10
-sockets: $40

i'm taking complete guesses (i have no idea on price) on these prices, so if i wrote too much or too little, please let me know. also, if i'm missing any parts, that'd be awesome too!
Reply
Old Oct 7, 2003 | 04:25 PM
  #2  
alwan16's Avatar
Senior Member
Tenured Member: 25 Years
 
Joined: Feb 2001
Posts: 568
Likes: 0
From: New York, NY
you don't need air tools for the job. they are nice but not 100% necessary. to remove the flywheel you'll need a huge socket and a flywheel stopper too. there are always little unexpected things along the way too. you can also borrow tools from your "nice" friends too. you'll need a load leveler too if you take out the tranny w/ the engine. that's about $40.
Reply
Old Oct 7, 2003 | 04:51 PM
  #3  
areXseven's Avatar
il Cosa Nostra e vivo!!
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2003
Posts: 2,096
Likes: 1
From: Dove le cose sono fatte il vecchio moda il senso
Re: Tools for Rebuild

Originally posted by Louis M
Alright, I want to embark on a rebuild, but I want to get the prices together before I get started b/c i'm thinking maybe having someone do the work for me might actually be cheaper... anyway:

-jack: $20
-four engine stands: $30
-engine hoist: $40 (rent)
-one of those 100 piece sets: $60
-air gun: $50
-air tank: $50
-hoses: $10
-sockets: $40

Tylenol Headache Medication: $3.39...PRICELESS

Good Luck!
Reply
Old Oct 7, 2003 | 05:04 PM
  #4  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
You might want to spend a little extra money on a decent jack. Most cheap jacks will only get the car about 12 inches if that off the ground. Not enough space if you are going to be working under the car.
Reply
Old Oct 7, 2003 | 05:44 PM
  #5  
Louis M's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: RX7 Heaven
but do i have the jist of it?
Reply
Old Oct 7, 2003 | 05:50 PM
  #6  
RX7SpiritR's Avatar
The Spirit of FLUFF!
Tenured Member 20 Years
iTrader: (1)
 
Joined: Oct 2002
Posts: 1,350
Likes: 0
From: East Highland, CA
sounds like it.
Reply
Old Oct 7, 2003 | 05:53 PM
  #7  
Louis M's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: RX7 Heaven
also, i know i need to buy the video... right? also, do i need to buy the racing beat kit (http://www.racingbeat.com/resultset....rtNumber=30017) or wait until its cracked open?
Reply
Old Oct 7, 2003 | 07:05 PM
  #8  
GoRacer's Avatar
Speed Mach Go Go Go
Tenured Member 15 Years
iTrader: (2)
 
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
Well the excentric shaft bolt is a biatch! I've busted two wrenches and a gorilla breaker bar. Oh and the air wrench wimped out and cried, so mine is still not off. You will need a tempered steel breaker $40 bar and socket $7 (sears), flywheel stopper $25 (MTrix), flywheel puller $25 (MTrix), 54mm socket (flywheel nut)$25, .5" to 1" (i think) socket adapter ($?), engine stand adapter $90 (Pineapple, mazdacomp or MTrix), engine stand $75, engine hoist $150, Atkins videos $35x2, low profile jack $150, jack stands $30x2, deep socket if pulling trans' $25, beer, asperin, band aids, roses for your girl friend ...etc.
Reply
Old Oct 7, 2003 | 07:15 PM
  #9  
Louis M's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: RX7 Heaven
ah... the joys of being single... the most expensive part is not needed (roses)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Vartok
2nd Generation Specific (1986-1992)
16
Oct 8, 2015 04:49 PM
NickNac113
1st Generation Specific (1979-1985)
13
Oct 1, 2015 09:25 PM




All times are GMT -5. The time now is 10:11 AM.