Hi,

I desperately need to find out this:

-What degrees is the front housing notch in relation to TDC?

-What degrees is the V in the trigger wheel in relation to TDC?

I ask this because i need to zero my wolf and get the trig1 deg BTDC set. But I cant get the damn thing to align with no figures to work on!

Thanks for your support.

George

Ps...for the 13B-REW

 

bump

 

service manual says factory settings are trailing 20° ATDC and leading 5° ATDC, dunno if this is gonna

 

service manual says factory settings are trailing 20° ATDC and leading 5° ATDC, dunno if this is gonna help you a lot...

 

I'd also hit the Wolf 3D forum up - I'm sure this has been documented for setting the unit up.

Dale

 

Thanks, thats what i figured. But anyone actually measure the degrees? in relation to the TDC on the V of the trigger wheel?

I posted also on the Wolf Section, but not much FDs with the wolf there.... so i need to get so generic REW info.....

George

The more input the better....appreciate it...

 

I'm tring to do the saem with my FD with a haltech E8 need help. need figure out the degrees