throttle problem
#1
Junior Member
Thread Starter
Join Date: Sep 2006
Location: Portugal
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
throttle problem
Hi, I have a '93 jdm fd3s and since the beggining had some boost / power issues..
I had to get the 2nd turbo replaced and some uni-direccional valves but the car isn't running like it should yet..
I noticed this on the throttlebody and asked a friend to see how his was placed..
he showed me a picture and mechanism (I don't know how to call it) isn't placed like mine..
here's mine:
here's the correct:
the question is: how do I place it correctly.. it seems stuck to that position :|
I think that it isn't opening all the three throttle valves..
thanks,
Pedro.
I had to get the 2nd turbo replaced and some uni-direccional valves but the car isn't running like it should yet..
I noticed this on the throttlebody and asked a friend to see how his was placed..
he showed me a picture and mechanism (I don't know how to call it) isn't placed like mine..
here's mine:
here's the correct:
the question is: how do I place it correctly.. it seems stuck to that position :|
I think that it isn't opening all the three throttle valves..
thanks,
Pedro.
#2
Senior Member
Join Date: May 2001
Location: laurel, md usa
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Any better first picture that include the cable bracket? Though I don't know if the positioning matters there as much as the result at the butterfies.
Do you have a shop manual to go over the adjustment?
why all the screws and bolts in your vaccum lines?
Do you have a shop manual to go over the adjustment?
why all the screws and bolts in your vaccum lines?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM