hi,
i have problems with my harness and searching i foud these connectors:
http://www.keefeperformance.com/tyco...onnectors.html

they looks like the originals connectors on the harness but i am not sure . if rhese are the same then this will be very usefull.
they state that the type is "Tyco "
abyone used them?

Or anyone know what type contacts (the ones that bites the cable and then incerted in the plugsmall metal things) the original connectors use?
where to find?

thanks

 

The first connector looks like the connector from the oxygen sensor ( co2 ).

 

also the othyers looks like the isc, aws air temp... but are the same?
onother option is to keep mine ansd change only the wires. basicaly the problem is on wires in the point that enters the plug. in that point the wire is unprotected with very bad resilts.
do you know how to pull the wire out of the plug ? these metal connectors are universal? all i had to do is change these with a piece of new wire and solder it to the old.
thanks

 

They look very similar but I'm not sure they're the same/compatible. Remember the latch must be the same design and the keying must match up precisely.

 

Sumitomo is who makes a majority of the FD harness connectors. Tyco sells some that look similar, but I've never seen anyone try them.