thermosensor question
08-20-04, 02:51 PM
#4
Originally Posted by Ball joint
do you know what color wires go to which sensor??
08-20-04, 03:47 PM
#5
ummm the fuel thermosensor is connected on the same harness as the 2 secondary injector connectors
the water thermosensor comes out of the same place at the harness as the black fan switch connector does.
if this doesnt help I can find my fuel thermosensor and tell you the wires for it
Yanni
the water thermosensor comes out of the same place at the harness as the black fan switch connector does.
if this doesnt help I can find my fuel thermosensor and tell you the wires for it
Yanni
08-20-04, 04:51 PM
#6
Senior Member
Join Date: Jun 2003
Location: Edmonton Alberta Canada
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
The "Water thermo-switch (fan)" has a black wire with a red stripe. Other side of it is ground, colour not indicated (P Z42 of 1993 wiring diagrams book).
The "Fuel Thermo-sensor" has a brown wire with a yellow stripe going to the ECU and a brown wire with a black stripe going to two other sensors brown wires with black stripes, the "Water thermo-sensor" (which has a green wire with a white stripe going to the ECU) and the "intake air temperature sensor"(which has a green wire going to the ECU). That brown with black stripe line appears to be a common for a lot of stuff. Page Z30 and Z32 of above manual.
The "Fuel Thermo-sensor" has a brown wire with a yellow stripe going to the ECU and a brown wire with a black stripe going to two other sensors brown wires with black stripes, the "Water thermo-sensor" (which has a green wire with a white stripe going to the ECU) and the "intake air temperature sensor"(which has a green wire going to the ECU). That brown with black stripe line appears to be a common for a lot of stuff. Page Z30 and Z32 of above manual.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM