Ban me for what, so your going to support black 99 then hey, All I am saying is that if you dont like what I am posting dont reply, simple. This forum is for anybody to post a problem, people like Black 99 are saying that you cant post a problem that they feel is stupid, Listen Black 99 or anybody else that supports him, I am here to get help from this forum and If a question is not answered I will repeat it to get it answered. Now for people like Black 99 they should go and open up there own forms and run there own stupid rules. As far as I am concerned? I am hear to get help, and there are people I am sure that are willing to help. Moderators if you read this post you will understand why this flame war has started, and i hope you will use your discretion and not cut me out of this>

It just seems to me that you are looking for people to diagnose EXACTLY what's wrong with your car. I told you that can't be done. You have started sooooo many threads for this same issue. People tell you what to look at, because it could be many things. You then put new turbos on your car, that were installed by a mechanic I assume for $3400.00(better be for that money) and then you get pissed, and throw a fit in your first post about it. I tell you what it could be, as well as some other people do, and you get pissed again and say I am not helping. I took it for granted that when someone gives you hints on stuff to look at, you then go take a look at that stuff and try to figure the problem out rather then trying to have people behind a computer miles away figure out what the problem is EXACTLY. You responses have been less then witty and all you have gotten accomplished is flaming. Did you take a look at anything anyone has told you to check?


I couldn't care if you call me a ugly, a geek, a faggot, etc. Because, you don't know me, my personality, my rx7 or anything about me. I don't care call me all the names in the book just learn some fucking automotive knowledge for christ sakes. If you are so in to working on your car as you said, buy a Mazda manual(available at any Mazda dealer BTW) and go try to figure somethings out on your own.

I could have flamed you a hell of alot worse than I did, if I did any flaming. But I chose to spare everyone the cheap insults.

Look Black99 IF you have a prob! take it else where go put your head up your ass even further the guy is trying to get some insight on his prob!!! I myself have a smoking prob! but i cannot figure it out either!!! so whatever that case may be! you should just piss of unless you have something of any HELP to say just piss off and keep putting that thumb up your ass some more!!! you know it feels good! ALright i am tired of people doing this shit!!! he wants help just give it to him!!! if you can't help and have nothing to say that is useful (wich you have none EVER) piss off! and get a life!!! ok!

so black 99 u think i'm a jackass cause I gave u some critisism,why don't u give me your fuckin address so I can come down there and beat u like the bitch you were born from:mspank: :mspank: .get this through your fuckin retarded head DO NOT REPLY IF YOU DO NOT LIKE THE THREAD,what does it hurt you if the guy post a thousand post on a topic just don't respond,just look at how many u have posted over a year,that is alot dick face ,all the people in here can tell u are a imbread little hermaphrodite from pa,fuck off u little bitch:devil:

BTW, I am not 100% sure if it's a rule or not because it's posted at the top of this forum(doesn't say "rules" though I don't think) but before you ask a question, you are supposed to try and search for the answer. In short it keeps the 3rd gen section from being cluttered with questions that have been answered over and over again. Or even with just questions that have been asked before. I told the young man earlier to "search" because it was a question about 3 rotor fitment into a FD. This question comes up every week or two. I also though gave him a little info about 3 rotor swaps and the 2 different ways to do it because I have researched the swap, and know a fair share about it. Do feel like explaining all my knowledge every week in a different thread? No. And I would imagine everyone else gets tired of typing answers over and over too. So that's why I told him to search. I was in no way being assanine about it.

Oh and by the way that is why people come here is to learn about their cars from other people that is what he is trying to do obviously!!! so don't tell people to learn about mechanics cause you learn from others!!! and this forum is a good way to get it done!

Just my 0.02$

Not necessarily, doesnt sound like the coolant seals failure to me.

Black 99 just stay away from peoples threads if you dont like it ok, you dont run the show here ok?????? now lets call it quits here, I dont want to see your stupid comments on my threads again.:wave:

You have no idea who you are dealing with junior(sorry jimlab). Hey you tell me when you're coming down big man.. I'll listen for the sound of flowmasters on a fox body mustang coming my way.. :D BTW, Everyone knows I was born in a test tube... Duh!! You'll have to try better than that.

Again this thread is over and done with as far as help goes anyways. And he has nothing more than his own ignorant flaming to blame for that.

Bye Bye you wont be missed pal, stay out of peoples posts and suck some pppp man here this is a good ppp for you to suck:mspank:

You are right you can learn about working on cars from other people. Is this forum only for teaching people how to work on cars? No. This forum is for people who love the rx7 and the different forums are for people who want to talk about issues related to those model years.

And... There are people who know little about cars with what I call "mechanic ability" meaning they want to learn, and more importantly have a base knowledge of cars, and general automotive knowledge.

And then there are people who have no mechanic ability at all. Girls sometimes fall into this catagory as they usually never do car maintance or repair cars themselves. When these people usually get a problem with their car, they usually take it to a mechanic instead of trying to work on it themselves because they don't have the time to learn about autos and they don't know alot already about how to going about fixing them. And I think these people should either do research and learn about the basics of cars and for example what white smoke versus blue smoke is, and that a broken vacum line usually causes bad idle. Or they should take their car to a mechanic.

every body knows you were from a test tube, i think they mixed the test tube up with monkey jizz,trust me I could beat u down with one arm behind my back,u listen for my car that will be the sound of death heading your way.good thing u are leaving now everybody can be calm and not start these retarded flame wars,ahhhh back to normal, no more test tubed monkeys .remember black 99 i know were u live hahahahaha:devil: :devil:

Why am I leaving again? Because you guys started a flame war and want to talk about monkey jizz instead of having an intelligent conversation??

BTW, I bet you do know where I live because you're just that smart. I bet in a town of 9,000 people you know exactly where I live.

true enough but how do you expect people to learn about their cars if they can't figure it out! they are most likely depending on others who have had the same prob! and have fixed it to give them a heads up! a forum is a collective mass of different people talking and working with each another! so in both ways! the forum is to be used! as far as i see it! people that are trying to do things them selves get a brownie point people who can afford to bring their car everytime they need their oild changed! have too much oil!

All I am saying is if you want to learn how to work on your car and don't know much about cars in general at least take the extra step to buy a manual. He has asked obvious questions about which parts are where that can be found out from a manual. He spent $3400.00 on turbos he could at least spend the $100.00 on a manual. I and most of the people on this board have a manual for our cars. I'll be truthful I know alot about cars in general and I still need the manual.

Finally a person that get the same message across that I have been trying to get throught to Black 99

All I am saying is if you want to learn how to work on your car and don't know much about cars in general at least take the extra step to buy a manual. He has asked obvious questions about which parts are where that can be found out from a manual. He spent $3400.00 on turbos he could at least spend the $100.00 on a manual. I and most of the people on this board have a manual for our cars. I'll be truthful I know alot about cars in general and I still need the manual.


I am not saying that I look down on people who use mechanics, I know I can't afford a mechanic, and that's why I learned what I know now. How'd I learn what I know? My dad has never been able to afford a mechanic, and everytime he was outside working on a car whether it was 30 degrees outside or 80 degrees outside my dad made me be out there to watch/help. I also learned If I run into a problem or question I look at the manual or use a search button. If I start a post and get some people telling me things to look at, I say "Thanks guys, you're great!" and go dig into working on my car to try to fix it. I don't spend the whole day on here with a flame war starting thread after thread.

Yes i own a manual but sometimes problems that are listed in the manual obviously need to be fixed! so why not try and get the advice from someone who obviously knows more than you! it is called teaching/learning! it is something that goes on for a long time!!! and in my opinion is a good thing! But anyway Rotary TockeTT good luck with your smoke i hope to find the cause of mine as well! Black99 I am not trying to be rude but be a little more polite with your suggestions!

How the fuck do you know if I have a manual or not, your putting words into my mouth buddy, what are you the fuckin gene in a bottle? I have a fuckin manual, I think It would be better to come onto this form and have someone reply that has had experience in fixing problems, but I guess there are the odd rotten apples like yourself that give out bull shit. Now for the last time Black99 take your small talk and use it somewhere else, You just wont admit that your wrong and that is why your keep putting your self in a deeper hole, stop defending your self and take your knowledge and posted somewhere else and not in my fuckin threads.:fruit:

I am not polite? Dig up any of his old threads or any threads I post in and you'll see I'm polite.

I don't think he has a manual or uses it. In his first post he asked where the turbo actuator was, which can obviously be found in a manual.

i guess the moderator is sleeping ,yes ,free to flame away:bash:
any takers

Black 99 I guess you have no life hey? shit man you actually sat on your computer and dug posts that I had made a while back? wow man jeez alot of time on your hands. So what If I had asked where the turbo actuator control is, whats the harm? maybe I didnt feel like flipping pages in a manual, and instead post it on the forum, for maybe others to see aswell who may also benefit for they may not have a manual. Your hypothesis with this whole manual thing is getting old man, look that is why this forum was created man, do you actually think everybody has access to a manual? I dont think so, so thats why forums like these can benefit those people who may not have them. Were not like you claim to be, a fuckin rotary guru and mr no itall, bye black 99, save your self the dignity and stay out of the forums, or change your views, or stay out of my god dam posts.

Yeah, all the moderators are probably sleeping. It's 11pm in the west coast now.

No I didn't dig the posts. Remember they were just last week and I posted info in them to try to help you.

RotaryRockeTT, I will not try to explain myself to you anymore. You obviously don't see my point. Good luck fixing your problem.

Why do you still think I am leaving? I haven't received notification...

BTW, if there's one thing I hope you learn on this forum, it would be how to spell..