Are there 2 different condensers available
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2001
Location: Florida
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Are there 2 different condensers available
Just tried to replace a broken AC line coming from the condenser to the drier. I received the new drier line and its cap would not fit onto the the condenser's thread. I believe my system has been changed over to the R-134a and possibly the entire AC setup too. Did 95 Rx7 have different AC lines and/or condenser?
#2
Senior Member
Join Date: Mar 2001
Location: columbus,Ohio, usa
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Yes, they are different. I have a 93 condensor and it would not fit on my 94. The cap will not go on also...I think the best thing to do is take it to a ac shop and they can make it work. Cheaper than buying a new one.
#3
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2001
Location: Florida
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
But does the condenser bolt up the same way? Can i buy a diiferent condenser and throw it on an older rx7? Are the condenser lines just different or are the bolt patterns and line configurations different? Thanks
#4
Lives on the Forum
The condensors are different on different models I am told. At the very minimum there are two different types of driers that use two different types of lines; they are completely incompatible witrh eachother.
I went through this last year in converting my system, turns out I have the rare and $$$ drier.
I went through this last year in converting my system, turns out I have the rare and $$$ drier.