Testing fuel system?
03-20-07, 08:51 PM
#1
NASA TTS Build
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: New York
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Testing fuel system?
I just replaced my FPD and Primary Injectors and I want to test for leaks before I put the rats nest and UIM back in. How do I test the system?
Edit: I thought I saw this before but when I searched today I couldn't find it.
Edit: I thought I saw this before but when I searched today I couldn't find it.
Last edited by Specter328; 03-20-07 at 08:58 PM.
03-21-07, 10:24 AM
#3
Did you look in the Factory Service Manual?
You need to use the diagnostic box and jumper GND and FP. Then turn the key to ACC and the fuel pump should run.
Here's some pictures on a good way to check for leaks:
https://www.rx7club.com/showpost.php...&postcount=255
You need to use the diagnostic box and jumper GND and FP. Then turn the key to ACC and the fuel pump should run.
Here's some pictures on a good way to check for leaks:
https://www.rx7club.com/showpost.php...&postcount=255
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM