teck edge WB question
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: San Francisco Bay area
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
teck edge WB question
Hello kinda hoping someone here can help me out.. I just installed the Tech Edge wide band.. Now Im trying ( without much luck ) in getting the it to monitor the RPMs. In truth I have not idea where to tap. I also got the traction control system and need this info for that as well.. Hope someone here will be able to help me out..
Thanks
Tek
Thanks
Tek
#2
Lives on the Forum
you can pick up an rpm signal in the diagnostic box on driver side front near battery at terminal IG-
if near the ECU and using that location, if memory serves, its a yellow wire w/ blue tracer (Y/L)
if near the ECU and using that location, if memory serves, its a yellow wire w/ blue tracer (Y/L)
#4
Senior Member
Thread Starter
Join Date: Jul 2002
Location: San Francisco Bay area
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
wow Im confused now... was lookin in the 95 wiring diagram book and it looks like the ywllow/blue wire goes to the A/c controls.. Also in looking it looks like the AT wiring system has a RPM ( its on page z-74 ) Y/L (what the hell color is L)
hope someone can help
Tek
hope someone can help
Tek
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM