Is this TCA bad.
#1
Full Member
Thread Starter
Join Date: Feb 2001
Location: Austin, Texas
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Is this TCA bad.
I bought a used Turbo Control Actuator from someone, to try to debug an elusive 1-2PSI boost drop after 5500RPM. With the TCA off the car, when I applied pressure with a Mighty Vac to the pressure side, and either left open the vacuum side, plugged the vacuum side, or applied vacuum with another vacuum pump to the vacuum side, the pressure would drop on the pressure side. The TCA would hiss while the pressure was dropping.
I'm assuming it is bad. Can someone confirm?
Thanks
I'm assuming it is bad. Can someone confirm?
Thanks
Last edited by almost99; 05-18-02 at 04:06 PM.
#4
Full Member
Thread Starter
Join Date: Feb 2001
Location: Austin, Texas
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Here were the configurations I tried:
Test Pressure Side Vacuum Side Result
1 Mity Vac at 5 PSI Open Leaks
2 Mity Vac at 5 PSI Closed Leaks
3 Mity Vac at 5 PSI Vacuum Pump at 20mm Hg Leaks
Pretty sure it is bad.
Test Pressure Side Vacuum Side Result
1 Mity Vac at 5 PSI Open Leaks
2 Mity Vac at 5 PSI Closed Leaks
3 Mity Vac at 5 PSI Vacuum Pump at 20mm Hg Leaks
Pretty sure it is bad.
Last edited by almost99; 05-19-02 at 02:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
alexdimen
3rd Generation Specific (1993-2002)
20
10-23-15 01:50 PM