taking out my tranny
#2
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
depends on if you know what your doing or not. It should only take you the better part of a day if you have the correct tools and have no other problems...( I.E.: the studs on the cat stripping, leaky rear main oil seal PPF bolts siezed etc....)Have a friend or 2 handy to help lower the trans and put it back in. I would also buy a Factory Service Manual if you have not already...very helpfull.Keeps you in the right order
#3
Urban Combat Vet
iTrader: (16)
If it's any help...I just took mine out today. I'd never done it before but had the manual. Doing it by the numbers I had it about 75% removed when another member came over who is MUCH more experienced. From putting it on jack stands to sliding the tranny out from under the car, it took me about 5.5 hours. But then again, I'm old and slow.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM