3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Switched power in the trunk area?

Thread Tools
 
Search this Thread
 
Old Feb 1, 2009 | 09:39 AM
  #1  
ArmitageGVR4's Avatar
Thread Starter
ArmitageFD3S
Tenured Member: 20 Years
Liked
iTrader: (13)
 
Joined: Oct 2002
Posts: 2,247
Likes: 26
From: Herndon, Virginia
Switched power in the trunk area?

I'm looking to install an auxiliary power port in the trunk to power an in-car camera for track events. I'd like to tap into some ignition-switched power in the trunk, but not from the fuel pump. I'm also a little hesitant to draw any power from the ABS computer. I don't know of anything else back there though. Any ideas?

Thanks!
Reply
Old Feb 1, 2009 | 10:13 AM
  #2  
ObliqueFD's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
iTrader: (32)
 
Joined: Nov 2002
Posts: 1,139
Likes: 2
From: Ohio
You could tap in to the antenna motor. Look at page J-3 in the wiring diagram.
Reply
Old Feb 1, 2009 | 10:17 AM
  #3  
badddrx7's Avatar
All Spooled Up
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2001
Posts: 2,752
Likes: 3
From: Ironton,ohio
It is safer to run you a switched 12v source back there.



Later
Reply
Old Feb 1, 2009 | 10:19 AM
  #4  
ArmitageGVR4's Avatar
Thread Starter
ArmitageFD3S
Tenured Member: 20 Years
Liked
iTrader: (13)
 
Joined: Oct 2002
Posts: 2,247
Likes: 26
From: Herndon, Virginia
I didn't even think about the power antenna. I will check that out. My car doesn't have a radio anyway so the antenna doesn't even need to be connected.
Reply
Old Feb 1, 2009 | 10:20 AM
  #5  
ptrhahn's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Feb 2002
Posts: 9,282
Likes: 703
From: Arlington, VA
This is a great idea, my camera battery seems to run out constantly at the track.
Reply
Old Feb 1, 2009 | 03:55 PM
  #6  
ArmitageGVR4's Avatar
Thread Starter
ArmitageFD3S
Tenured Member: 20 Years
Liked
iTrader: (13)
 
Joined: Oct 2002
Posts: 2,247
Likes: 26
From: Herndon, Virginia
Originally Posted by ObliqueFD
You could tap in to the antenna motor. Look at page J-3 in the wiring diagram.
Thanks for the recommendation, it works perfectly! I used the switched ACC power from the antenna and mounted the accessory power to the underside of my harness bar. With the center divider and the parcel shelf in place it's almost completely invisible. When I put back in the trunk plastics, it'll hide the wiring better as well.


Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM




All times are GMT -5. The time now is 08:47 AM.