Stuff I did on my FD today - What about yours?
 

OK really quick - the idea behind this thread is to have a daily-updatable thread where you can write about all the little stuff you do with your car (or even big stuff). Posting pictures and chatting within the thread is encouraged.

To post pics use img codes [img] right click the image - click on the properties and copy paist the Address URL here [/img]

I'll start things off with the stuff I've done tonight. 7/06/12

When I bought my car the tachometer didn’t work due to whoever changed the faces out on the gauge pushed the needle too far in and it was stuck at 1200 rpm. I also plastic Epoxied all the broken clips back till I can get a new gauge lid.

https://farm8.staticflickr.com/7117/...93be91b5_z.jpg

https://farm8.staticflickr.com/7268/...f3b67326_z.jpg

https://farm8.staticflickr.com/7274/...b5e86285_z.jpg



Also over the lase weekend i pulled the front end off car to fix a bumper issue. I found that i have a crushed oil cooler plus i pulled the intercooler off to hunt down a bad cupler and check turbos for shaft play.

Bumper off the car
Found part of the issue. I guess the paint shop use a house hold black silicone to hold upper bumper bracket on.

https://farm9.staticflickr.com/8158/...8074086c_z.jpg
https://farm9.staticflickr.com/8431/...eca9ae63_z.jpg


Crushed oil cooler.. time for a upgrade :)

https://farm9.staticflickr.com/8002/...5c6560d0_c.jpg


Also noticed that the radiator had no upper mounts so i made my own.

https://farm9.staticflickr.com/8151/...6425a97fe1.jpg
https://farm8.staticflickr.com/7121/...4929a36d_n.jpghttps://farm8.staticflickr.com/7251/...2bab04b0_n.jpg

https://farm9.staticflickr.com/8011/...29587faaf9.jpg

Had almost no shaft play but i think the turbos aren’t as new as i was told they were.
https://farm9.staticflickr.com/8022/...e02d26e313.jpg






If this thread is deemed useless please delete or lock it moderators.

Got a flexpipe welded into to my downpipe. Couldn't meet SCCA noise regs, so I put the Magnaflow resonator back on.

Since the last time it was on the wastegate was plumbed through the exhaust, and I couldn't close about 1/8" gap on one side of the exhaust flange. Now that all looks fine, just trying to get the downpipe lined up again with the V-Band clamp.

V-Bands are fine, once you get the pipes lined up. Always takes several tries to get rid of exhaust leaks.

Got some 99 Spec tails with scratched up lens for cheap, so I swapped the lens over from my stockers, cheap 99 Spec for me :)

http://i133.photobucket.com/albums/q...7/DSCN4149.jpg

http://i133.photobucket.com/albums/q.../DSCN4155b.jpg

Fun stuff man, I'm about to go install my OEM Nardi wheel :)

Post up some picture when you have it install :)

Got my suspension all sorted and got everything prepped for its trip to Speed 1 on monday

^^
it's nice to see how the little things are done, especially when you haven't done them yet.

I watched it bake underneath the car cover in this 100 degree weather.

I need to move out of this shit hole of a state.

Cool thread :icon_tup:

For the last 2 weeks or so every day after work I was tearing wonderful parts off of Carols old show car to provide to all my wonderful loyal customers :nod:

Fixed the unlock rod on one of the DD cars (was bent and wouldn't unlock the car with the key)

Took out the m2 med and intake on one of the DD cars. Installed an efini y pipe and then tried to put the PFS smic in but the koyo N flow is too fat so that's coming out today and a fluidyne will have to replace it. Car has AC so don't tell me it will fit. Sure I can take off the front bumper and rework all kinds of stuff but moving the condenser and rad further down and effing up the air flow even more is not for me.

Put a short shifter in one of the DD cars and swapped out the stock tails in favor of some 99s

Tried to diagnose a radio issue with one of the cars I just bought but I'll probably have to swap it out.

So I'll be drenched in sweat later today what do you fellas have planned :D

PS this week the big project will be dropping the rear end out of Carol's car to put in my track car....... FUN STUFF :nod: I may take some pics of that one and post hear :icon_tup:

Replaced a fuel filter and cleaned my hks rs intake cones....fun stuff I know.

It never ends w/ the FD.

This has longest thread potential LOL

I started to check for boost leaks today. Found three leaks in a couple of seconds. Two of them were from my couplers, and the other big one is coming from my home made tester lol.

I ran out of time so I will seal the tester another day and try again.

Pulled into my driveway and reached for the drivers window switch to roll up my window. A light snap was heard and the window didn't move. Yay...the switch is glued and curing right now. I'll put it back together tomorrow

Nice guys . Like how this thread is going so far..

Pics people pics..


Today i got under the rear of my FD and hunted down the clunk i have. Looks like its time for a full bushing replacement. would have pics but dint have my phone..

I finally may have an engine to rebuild & may have a car going soon. So I got stuck in cleaning all the interior off the car. Ripped out old stereo & started polishing all my alloy parts.
Will be great to have car running after 4 years of it sitting on the lawn :(

Well today I got my new act clutch in and got almost every thing els in exc the mid pipe 2mro I am going to pull the primary rail and do a fpd removal it was leaking like no other promptly will to the injector o rings to

Took a nice trip to Speed 1 to hand the car off to Doctor Dave (as his door is marked)

took her out for ride after finishing the V-Mount setup, and relocating the Battery to rear bins, now all i have to do is weld new brackets to the condenser and make new a/c lines.

http://i961.photobucket.com/albums/a...991/010-27.jpg

http://i961.photobucket.com/albums/a...991/012-21.jpg

http://i961.photobucket.com/albums/a...1991/020-9.jpg

I unpacked my Shine front bumper, bumper guards, and side skirts. I cleaned up my drool.
Attachment 757977
I test fit them.
Attachment 757978
Attachment 757979
I bled my brakes after installing my Tein Flex's last week.
I changed my oil because it has tons of gas in it from me forgetting to put something together two years ago
I stared at my new rims more that I installed last week. :-D

I dont like the headlights :-( I was hoping they would be more sleek. They dont match with the 99 spec turn signals at all lol.

Your right those headlights need to go :s

Pulled the uim fpd was leaking going to just remove it also started to do the vac lines while I have the uim off also pulled the fenders and bumper going to open up the bumper for the fmic
http://i1148.photobucket.com/albums/...i/d27aa4ed.jpg[/IMG]
http://i1148.photobucket.com/albums/...i/0c0c3131.jpg[/IMG]
http://i1148.photobucket.com/albums/...i/5cc72551.jpg[/IMG]
http://i1148.photobucket.com/albums/...i/61dff941.jpg[/IMG]
http://i1148.photobucket.com/albums/...i/00e7bf57.jpg[/IMG]

I put gas in mine and washed it. :)

^ same here, add gas

Wish I was that lucky couldn't really work on the car that much this winter b/c I work 3 jobs in the winter but have most of spring and summer off should be running soon

This was on Monday but I FINALLY installed an R2 front lip spoiler on my '94, after 9 years of ownership and 9 years of wanting to do it... did it despite the recent boost problem I'm having.

Will order check valves from Dale and next week, stuff I did on my FD today will involve replacing most of the check valves hoping that fixes my problem. :)