streetport idle
#1
fart on a friends head!!!
Thread Starter
streetport idle
what kind of an idle does a street port have. im just wondering what the actual characteristics are. im not sure, but im thinking my engine has been replaced and im thinking it might possibly have a street port. it kinda sputters at idle. smooth, but a slight sputter. also, i did the pcv elim. and used an inline fuel filter to run from the crankcase to the pri. tid (i saw it on rob robinettes sight) and i was cleaning it today. there was a creamy deposit left in it. almost the same color as eggnog. very creamy. just wondering if anybody knows what it might be. thanks.
paul
paul
#4
Obsessed
Join Date: Oct 2001
Location: Oceanside, California
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dpasseto
what do you gain by street porting your engine? I take it people get this done when they blow their motor and the case is split?
what do you gain by street porting your engine? I take it people get this done when they blow their motor and the case is split?
http://1002.org/noon/Port%20Matching.htm
#5
fart on a friends head!!!
Thread Starter
im just wanting to know from anybody that has a streetported motor if it idles a little funny. i have just a very, very small stumble.
#6
Rotary Enthusiast
Join Date: Feb 2001
Location: Montreal, PQ
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
has the idle change? if so then it probably isn't the porting. Has it had the engien replaced?
I have a streetport and at 720rpm it rumbles, but at 950 it is smooth.
if it it s streetport the stumbles shoudl be consistent, not intermittent.
I have a streetport and at 720rpm it rumbles, but at 950 it is smooth.
if it it s streetport the stumbles shoudl be consistent, not intermittent.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM