MuRCieLaGo

iTrader: (14)

Hi,

I would like to know if some shops offer only the street port service - without rebuilding the entire engine of course.

Thanks.

RotaryEvolution

iTrader: (30)

ask in the canadian section, shipping 200lbs of cast iron and aluminum internationally is something i would suggest trying to avoid at all costs.

H_M

iTrader: (7)

The closest shop to you is Derwin Tuning / Derwin Performance in terrbonne. I don't have any experience with them but it's worth giving them a call. I saw on their FB page that they'll have an open house on May 13.

IRPerformance

iTrader: (41)

I offer it. Pricing starts at $500 and goes up depending on the type of porting.

thewird

iTrader: (8)

Whereabouts in Canada are you?

thewird

MuRCieLaGo

iTrader: (14)

I live in Canada but I've got two addresses in USA. IRPerformance that is for the whole porting job?

RotaryEvolution

iTrader: (30)

you really don't want to ship that stuff internationally. you'd be lucky shipping it even in your own country without any damage. add in the labor and dealing with insurance and you got a cluster**** waiting to happen.

but you wanna ship that stuff half way around the world, be my guest... otherwise i would have suggested someone.

7_rocket

iTrader: (6)

Google says it's Quebec

Quebec sir. You live in Quebec

IRPerformance

iTrader: (41)

Yes. Irons and rotor housings. Porting starts at $500 and goes up to $1000 depending on the type of porting. The higher end of the spectrum would be a full bridge. The lower would be a mild street port. Porting is an acquired skill. My timing duration, and shape are all proprietary and have been developed over countless motors over the years. My ports make significantly more top end power over a stock port, while requiring less boost to do so and with little to no loss of low end. My stage 3 aggressive street port is worth 50 hp at the 500 hp level.