3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Strange Headlight Issue on FD3

Thread Tools
 
Search this Thread
 
Old Sep 23, 2010 | 03:31 PM
  #1  
Leeroy_25's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Aug 2008
Posts: 1,101
Likes: 13
From: Portsmouth UK
Strange Headlight Issue on FD3

Thought I would find a thread on this but no such luck yet. My passenger side headlight starting messing about today. When you turn them on it comes up a little bit then stops. Other side is fine. When you switch them off it pops right up then goes down? I thought it might be sticky motor or dodgy connection so I pressed the button on the dash to flip it up so I could get a drop of oil around it only to find it was going up and down fine? Then I realised it pops up and down fine if you press the button on the dash but sticks halfway up if you turn the lights on at the stork? Can someone please let me know what's wrong and the fix?!

Cheers
Lee
Reply
Old Sep 24, 2010 | 11:53 AM
  #2  
backwood's Avatar
Junior Member
Tenured Member 15 Years
 
Joined: Apr 2005
Posts: 37
Likes: 0
From: Ireland
headlight

Yeah same thing happened to mine. I ended taking out the heahlight unit and the motor. I stripped the motor and found that the little worm gear was completely dry leaving all too stiff. So I greased it and put it back together. I fiddled aroung with the setting on the lift a little as well and put all back in. So far since its been fine.
Reply
Old Sep 25, 2010 | 01:04 PM
  #3  
Leeroy_25's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Aug 2008
Posts: 1,101
Likes: 13
From: Portsmouth UK
But did yours only stick when you switched it with the stalk like mine? Would it pop up okay with the button on the dash?
Reply
Old Sep 25, 2010 | 03:57 PM
  #4  
alexdimen's Avatar
TANSTAFL
Tenured Member 15 Years
iTrader: (13)
 
Joined: Oct 2003
Posts: 3,770
Likes: 128
From: Richmond, Va.
You've probably just got moisture in the motor housing. I know what you're thinking, but it may just be a coincidence. Take it apart, dry it out completely, then put it back together with sealant.

The switches just control current to the motors, not the opening and closing of contact due to position. You'll see what i mean if/when you get it apart.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MazdaspeedR1
The Bad & Fugly Businesses
27
May 22, 2018 05:58 PM
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM




All times are GMT -5. The time now is 07:11 AM.