STOCK FD: Blitz Water Temp Issues
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: New Zealand
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
STOCK FD: Blitz Water Temp Issues
I have just finished a build of a stock FD and when putting everything back on noticed that the wire leading to my water temp gauge (in the thermostat housing) is broken.
I've tried to reattach and/or troubleshoot this as now my gauge won't give a reading. i've tried coiling the original wire around the temp sensor and dropping it into a cup of boiling water but get no reading... which leads me to a few questions!
1. do Blitz temp gauges comes with that coil wire standard? or is it just something the previous owner has used.
2. can the hideous wire be replaced with standard wrapped electrical wire?
3. does the wire need to be soldered to the sensor need to be soldered on to work?
thanks anyone! nobody seems to talk about these blitz gauges on here!!
I've tried to reattach and/or troubleshoot this as now my gauge won't give a reading. i've tried coiling the original wire around the temp sensor and dropping it into a cup of boiling water but get no reading... which leads me to a few questions!
1. do Blitz temp gauges comes with that coil wire standard? or is it just something the previous owner has used.
2. can the hideous wire be replaced with standard wrapped electrical wire?
3. does the wire need to be soldered to the sensor need to be soldered on to work?
thanks anyone! nobody seems to talk about these blitz gauges on here!!
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
befarrer
Microtech
3
08-22-15 05:52 PM