my blinkers and hazards have been down over a year. took it to the dealer when i first had the problem. they diagnosed a faulty cpu flasher by the driver side footwell area. i changed it. along with new switch assembly and the hazard switch. still nothing works. i can hear the turn signals ticking w/o any of the lights working. but the funny thing is that i don't hear the tick when i press the hazard button. wtf....i can't seem to figure it out...any input is appreciated. i have searched many times w/o results. is there a flasher relay in the engine bay??? is so where is it and what is it labeled. yes i checked all the fuses and bulbs. thanks kevin

 

^

 

anyone???

 

fuse status?

 

hazard button may be tapped into a ground.?.

 

fuses are fine. .....just replace the hazard button..... is there a relay switch for the flashers????

 

your tail fuse is fine? that'll mess you up and your interior lights will die

 

yeah it's been a long time and the **** still don't work. just replaced the switches, the turn signal cpu, all the bulbs and fuses. also replaced the hazard switch. when i engage the signals it ticks but no lights. when i press the hazard button there's no sound. could it be the hazard switch is fucked or something else. i will try to test with a voltmeter this weekend. damn frustrating. kvn

 

there's local auto electric shops that'll help for something like 20 bucks, at least around here

 

have you checked the wiring running to the hazard switch?