Steel braided fuel lines and FPD replacement?
#1
Driving a Rotary Sled!
Thread Starter
Join Date: Apr 2006
Location: Dallas, TX
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Steel braided fuel lines and FPD replacement?
Hey guys,
Where would I be able to get steel braided fuel lines and a fuel pulsation dampener replacement for a good deal?
Thanks!
Where would I be able to get steel braided fuel lines and a fuel pulsation dampener replacement for a good deal?
Thanks!
#2
RX-7 Bad Ass
iTrader: (55)
Are you upgrading to big fuel rails/injectors? If so, do some reading - this has been covered quite a bit, especially on the single turbo forum. If you have stock rails/injectors, use stock Mazda hoses. Steel braided lines are difficult to work with, and are VERY abrasive - they can easily rub through wiring, hoses, all kinds of stuff.
Any Mazda parts get from Ray at Malloy Mazda - 888-533-3400. You can get the FPD and fuel lines from him. Mazda had a fuel line recall kit that comes with all the upgraded high-temp lines and all the clamps and everything - that kit is a good way to go.
Dale
Any Mazda parts get from Ray at Malloy Mazda - 888-533-3400. You can get the FPD and fuel lines from him. Mazda had a fuel line recall kit that comes with all the upgraded high-temp lines and all the clamps and everything - that kit is a good way to go.
Dale
Thread
Thread Starter
Forum
Replies
Last Post
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM