M104-AMG

iTrader: (8)

Is there any reason to go the spec '99 oil-cooler ducts for a R1-cooler setup on a stock '93 touring FD ?

If so, PN#'s ?

TIA,
:-) neil

rynberg

The 99-spec ducts are designed to work with the 99 front end. Why would you want to use them with the 93 front end???

Sled Driver

iTrader: (9)

Do you have a 99 bumper???

If not, you already have dedicated ducts for your oil cooler(s) that line up to the 93-95 bumper.

If you do have a 99 bumper installed, the 93-95 oil cooler ducts don't fit worth a ****.

You'll need something to remedy this. Mazda makes corner plastic sections that also enclose the brake ducts (kinda). The bumper has fairly deep opening to direct the air to the oil coolers. That way at least if you look though the ducts you wont see the ground (tacky)

I added the "R-Magic" fiberglass oil cooler ducts the mimic the 93-95 ducts, but are designed to fit the 99 bumper.