Are the solenoids interchangeable?
#1
Senior Member
Thread Starter
Join Date: Jun 2001
Location: Louisville, KY
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Are the solenoids interchangeable?
I'm doing a silicone hose/turbo system simplification/spyfish block-off plate job. Of the 7 solenoids in the rack, are they interchangeable between each other? I found the reason, I believe, my 2nd turbo wasn't coming online. There was a couple of those solenoids with broken nipples. Now, I don't need the EGR or Double Throttle solenoids and was wondering if I can use those to replace the broken ones. In the manual, it says to test all of them the same, so they should operate the same, right?
#3
Senior Member
Thread Starter
Join Date: Jun 2001
Location: Louisville, KY
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Wade! That'll save me about $100. Now, I just have to replace one I broke and two others that I found w/ broken nipples
No wonder my car didn't drive right, I should've taken pictures of the vacuum hoses before I pulled them all off. Besides being hard as ROCKS, there were a couple that had been broken by someone and then jammed onto what was left
No wonder my car didn't drive right, I should've taken pictures of the vacuum hoses before I pulled them all off. Besides being hard as ROCKS, there were a couple that had been broken by someone and then jammed onto what was left
Thread
Thread Starter
Forum
Replies
Last Post
alexdimen
3rd Generation Specific (1993-2002)
20
10-23-15 01:50 PM
Wicked93gs
2nd Generation Specific (1986-1992)
42
10-07-15 11:58 PM