SMIC dimensions? - need information
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: So. Ca
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
SMIC dimensions? - need information
Guys,
For those of you who have SMICs, I need to know what the overall size is L x H x D for the ones that you have installed. Ideally, I need the measurement for an SMIC that will retain the battery in the stock location (I was thinking Greddy, M2 Med, Blitz etc...).
I am looking at a core that may work, but I need to know how much room I have to deal with for the end tanks etc... Any help would be appreciated. TIA
For those of you who have SMICs, I need to know what the overall size is L x H x D for the ones that you have installed. Ideally, I need the measurement for an SMIC that will retain the battery in the stock location (I was thinking Greddy, M2 Med, Blitz etc...).
I am looking at a core that may work, but I need to know how much room I have to deal with for the end tanks etc... Any help would be appreciated. TIA
#3
Senior Member
Join Date: Nov 2001
Location: Sacramento
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Go to the following link, scroll down the page, and you will see a list of the dimensions for all the popular FD SMICs:
http://www.scuderiaciriani.com/rx7/intercoolers.html
http://www.scuderiaciriani.com/rx7/intercoolers.html
#6
Junior Member
Thread Starter
Join Date: Mar 2001
Location: So. Ca
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
That is exactly my point. If I know the size of the entire unit then I know how much room I have left to fabricate the end tanks to have enough hood clearance etc....
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM