small boost leak on NON SEQ?
Thread Starter
Hi Powr FD's
Joined: Oct 2002
Posts: 806
Likes: 0
From: OKC
small boost leak on NON SEQ?
Since doing the full NON SEQ (I took all flapper doors out and did block off plates).
I swear I dont get the instant punch in the back like I did went I did the poor mans N.S.
Boost builds smoother and seems to hit Full Boost about the same. It just seems like the instant rush in power was stronger than this smoother boost buildup. *shrug*
And vacuum used to be a solid 20hg, and now it hovers around a slightly lower 17-18hg.
You old skool N.S. guys think I have a small leak? Or is all this relevant to removing all that gadgetry (Double Throttle, capping CRV and etc ..)?
whats the usual way to check for boost leaks with Non Seq setup?
I swear I dont get the instant punch in the back like I did went I did the poor mans N.S.
Boost builds smoother and seems to hit Full Boost about the same. It just seems like the instant rush in power was stronger than this smoother boost buildup. *shrug*
And vacuum used to be a solid 20hg, and now it hovers around a slightly lower 17-18hg.
You old skool N.S. guys think I have a small leak? Or is all this relevant to removing all that gadgetry (Double Throttle, capping CRV and etc ..)?
whats the usual way to check for boost leaks with Non Seq setup?
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM