Slave cylinder?
11-02-08, 07:54 PM
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Location: Montana
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Slave cylinder?
Has anyone had a slave cylinder go out, i was wondering if you were getting the same simptioms as me. My clutch pedal goes in almost feeling like normal but it seems to be vibrating a little but its not disengaging the clutch at all cuz i cant get it into gear. My clutch is fairly new and it wasnt slipping at all before, and it just stopped going into gear so it wasnt like it could be a catistrofic failure..... that is what leads me to believe it would be the master cylinder or the slave. thanks for the input
Wes
Wes
11-02-08, 09:29 PM
#2
FREAK ALL OUT!!!
iTrader: (17)
Join Date: Jul 2006
Location: Vancouver, WA
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
check for fluid leaks inside the car under the drivers dash where the master cylinder is and also check for leaks where the slave cylinder is. The slave is pretty easy to get out and check for leaks as well.