single turbo kits ques?
#1
Junior Member
Thread Starter
Join Date: Jan 2002
Location: Miami, FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
single turbo kits ques?
hows the spool time for the Greddy T-78 and T-88 turbo kits? and also, rx7store.com says that it has 430/460 RWHP, do you need any other fuel/engine mods to run that much HP that dont come with the kit?
and how are the greddy kits and the XS kits?
and how are the greddy kits and the XS kits?
#2
IRS 4 Life
iTrader: (12)
Join Date: Feb 2001
Location: Sicklerville, South Jersey!!
Posts: 2,634
Likes: 0
Received 2 Likes
on
2 Posts
you should post this in the single turbo section..youll get more responses there...
t-78 and 88 are lagy compared to stock but make more hp...its all a big comprimise...
for a single u MUST have upgraded fuel system(min 1200cc secondaries) rrfpr, big ic.. standalone engine managment..ie haltec or pfc....and a big wallet full o cash
even if u do it yourself,,, if u start with a stock car your lookin in the neighberhood of 5-6k to go single...
3300 t-78
1400 standalone
500- big secondaries and rrfpr
200 fuel pump
500 midpipe and cat back
1100 fmic
almost 7k not incl tuning and install....
almost forgot u SHOULD get a ported motor to get the full amt of power out of the turbo..so theres another 3-4k for a good build
so roughly 10 to have a beast
t-78 and 88 are lagy compared to stock but make more hp...its all a big comprimise...
for a single u MUST have upgraded fuel system(min 1200cc secondaries) rrfpr, big ic.. standalone engine managment..ie haltec or pfc....and a big wallet full o cash
even if u do it yourself,,, if u start with a stock car your lookin in the neighberhood of 5-6k to go single...
3300 t-78
1400 standalone
500- big secondaries and rrfpr
200 fuel pump
500 midpipe and cat back
1100 fmic
almost 7k not incl tuning and install....
almost forgot u SHOULD get a ported motor to get the full amt of power out of the turbo..so theres another 3-4k for a good build
so roughly 10 to have a beast
#5
Banned. I got OWNED!!!
500 RWHP is NOT an easy task. there are not many FDs into the 500 range. im assuming you meant 500 BHP, so thats around 435 RWHP, and thats attainable through most of the larger (T04S, T-78, etc.) turbo kits.
take this to the single turbo section. you will get a lot more responses.
take this to the single turbo section. you will get a lot more responses.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM