signal lights & hazards dont work, HELP
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Panama City, Fl
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
signal lights & hazards dont work, HELP
I posted before but didn't get any help.I have checked everything that I can ( fuses, relay, light bulbs and connector X-07). Just one day it stoped working, you can hear the ticking when you use the turn signal but no lights come on in or out. I replaced the signal and hazard CPU and nothing. The hazards also dont work when pressed. What can this be, where can I check and how can I troubleshoot to pinpoint problem? Please help me it has been like this for 4 months now.
#2
I am becoming...
iTrader: (1)
Join Date: Jan 2003
Location: Montgomery, AL
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
my guess is there's a loose wire or cut wire somewhere after the relay. That's about the only thing it could be if you can hear the relay clicking and you know the bulbs and fuses are ok. Start tracing wires I guess.