Im getting ready to install my Autometer Shift light and wanted to know where to hook the wire up for the input on the light.

Im currently using a HKS Twin Power. Can I splice it to something there?

Let me know what you think

 

look at the diagnostic connector. There is a pin (21 or 24? please check manual) that is labeled as "IGL-". I use this to determine rpm for a rpm activated switch.

 

I wired my shift light to my TP...If i remember it is spliced off a white wire....if no white then it was green

 

So Its gets attached to the leading ground wire?

RotaryKnight,
Can you please check for me?

 

Anyone have any idea on where the IGL-- would be on the ECU ? What pin #?

I dont have a shop manual...

 

it's available online (shop manual) I'm at work so i don't have the link, but it's www.luv94rx7.com or something. that's his username too. do a search on the forum for that user or for shop manual. you'll find it.

 

YEha Im searching that now but no luck in finding which one the Leading IG- is

 

Rotary93 on your TP what color wires come out of it?

 

actually i meant search for the manual, then look it up in there. here's the link http://www.iluvmyrx7.com/Technical_I...ice_manual.htm

 

5 wires

Black, red, yellow
green white

 

Thanks guys but I found it...

White wire on the Twin power....